Illuminetrix Contractor LED Lighting Kit

Light up the room! This kit offers everything you need to set up an energy-efficient LED system to bring warm white light to your kitchen, office, workshop or RV. Contains 24 7-1/2" LED light strips, a 1 amp UL approved plug-in transformer with a 6' lead (hosts up to 24 lights), an on/off micro switch and a wire kit including optional mounting screws, adhesive mount wire management clips and 30' of 22 AWG twisted solid wire.Additional Features:No tools required for installationLow power consumption - less than half a watt per light stripLasts up to 25 times longer than conventional lightingLight strips feature adhesive mount and stay cool to the touchLight strips measure 7-1/2"L x 1-1/4"W x 3/4"H

$199.99
Buy
 

Related Products

Triton TRPUL 3-1/4'' Unlimited Rebate Planer

Triton TRPUL 3-1/4'' Unlimited Rebate Planer
$169.99

With a blade that runs the full length of the bed, Triton's TRPUL Unlimited Rebate Planer can cut rabbets as deep as your heart desires, and also works great as a standard surface planer as well. It can hog off up to 1/8'' in a single pass, and features a 17-position depth control for fast, precise adjustment of the amount of material you want to remove. Simply repeat the passes until you reach the desired depth. The adjustable auxiliary handle adds comfort, while the integral parking stand prevents damage to the blade when you set the planer down. The blade drum can even be removed and replaced with the included sanding drum to allow easy sanding of the bottoms of your rabbets. Left or right rear dust extraction. Cutting capacities: width 3-1/4'', depth 1/8''. Weight 8.6lbs. 0-1/8'' Adjustable depth of cutVariable speed control adjusts the drum speed to suit the material3-blade drum provides a higher rate of material removal (46,500 cuts per minute)Bail handle for improved ergonomics and increased controlLeft or right rear dust extraction allows the dust/chips to be directed to either side of the workpieceDrum guard protects against exposed blades when rebatingSpindle lock button for easy drum changesParking stand protects the blades and workpiece from damage on run downPower-on neon light increases operator safety

One of a Kind Hemlock Slab - 96'' L x 15'' W x 2'' Thickness

One of a Kind Hemlock Slab - 96'' L x 15'' W x 2'' Thickness
$349.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

Black Maple Staggered Inlay Banding, 5/16'' W

Black Maple Staggered Inlay Banding, 5/16'' W
$18.99

Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.