Loox 3010 24V LED Puck Light

Offering easy plug-n-play installation, compact size, and soft, pleasing light, these LED puck lights are a go-to option for both task lighting and accent lighting. Use them under upper cabinets, inside glass cabinets or drawers, and to highlight artwork. Each light includes an integral 78'' cable, which can be extended with the optional extension leads (57395). Requires Hafele Loox 24V Driver and Switch (e.g. 59678 and 56850, sold separately). Easy to install; surface or recess mountedDriver plugs into wall outlet; no need for an electricianEnergy efficient with low heat outputLong lasting—up to 50,000 hoursDimmable with optional Dimmer Switch (56850)Optional Door Contact Switch (53213) turns light on when door is opened

$27.99
Buy
 

Related Products

Maple by the Piece-3/4" Thickness

Maple by the Piece-3/4" Thickness
$8.99

The classic American blonde, Hard Maple features creamy white sapwood with a reddish cast, and rugged durability. The wood has an exceptionally fine, even texture, and tight pores that yield an excellent finished surface. These thin boards are machined to 3/4" thickness, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: May reach a height of 70 to 120 feet, with a 24 to 36 inch diameter trunk. Sapwood Color: White with a reddish cast.Heartwood Color: Uniformly pale reddish brown or light tan. Grain: Usually fairly straight, but can also be curly or wavy. Sometimes exhibits decorative figuring like bird's eye, maple burl, blister, leaf, and fiddleback.Texture: Very fine and even.Working properties: Due to hardness, tools must be kept very sharp.Carving: Responds well to carving tools.Steam bending properties: Fair.Strength Properties: Very high bending strength. Resistance to compression parallel to the grain is high. Hardness is rated as medium. It is heavy, and resists denting and marring. Hard Maple can be up to 25 percent harder than Soft Maple.

Cherry by the Piece-3/4" Thickness

Cherry by the Piece-3/4" Thickness
$9.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Laguna ProForce 3/4" Band Saw Blade

Laguna ProForce 3/4" Band Saw Blade
$31.50

Resaw work is a cinch with this Laguna ProForce 3/4" Band Saw Blade! With 3 teeth per inch, it slices through any stock, helping you make accurate straight cuts and light curves on finished stock or stretch your woodworking dollars by creating your own lumber. Available in 105" or 125".These blades are inspected individually to ensure quality and are made out of tempered Swedish Silicon Steel.