Loox 75W Driver for 24V LED Lighting

This driver is compatible with Hafele Loox 24V LED lights and switches (available separately). Just plug the driver into a standard outlet and the lights and switches into the driver. It accepts up to six lights and 1 switch with a maximum total load of 75 watts. To determine the total wattage, simply add up the wattages of the lights you wish to use. If the wattage exceeds 75W, you will need an additional driver. Plugs into wall outlet; no need for an electricianControls up to 6 lights and 1 switchDimmer switch compatibleEnergy efficient

$54.99
Buy
 

Related Products

Black Maple Mahogany Block Inlay Banding, 1/4'' W

Black Maple Mahogany Block Inlay Banding, 1/4'' W
$14.99

Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.

110 Volt Halogen Canister Lights-Master Lights

110 Volt Halogen Canister Lights-Master Lights
$34.99

Wire up to six lights in a series. Mounting bracket eliminates the need to drive screws through the decorative ring and allows installation in cabinet panels of different thicknesses.Plugs directly into household current without low voltage transformer. Wire up to six lights together with a master and five dependants. The master has a 10 foot cord, roller switch, conventional electrical plug and UL listed T-plug. Dependants have T-plugs on both ends of 24" long cords--an Underwriters Laboratory requirement for lights wired in series. 50 watt bulb included. Fixed beam.Mounting Bracket eliminates the need to drive screws through the decorative ring and allows installation in cabinet panels of different thickness.Top must be open to permit air circulation.4-1/2" overall height.

Curly Maple Sold by the Piece-1/2" Thickness

Curly Maple Sold by the Piece-1/2" Thickness
$10.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.