Rocker Switches for Xenon and LED Lighting

These rocker switches are for Xenon and LED lighting applications. The switch is installed on the 12V side and includes male and female connectors to make assembly easy, typically requiring no cutting or splicing. Recommended for applications up to 60W. Switches are compatible with the following lighting solutions:Tresco Pockit LED Lights Stellar Arch LightsTechnical Details:Switches will add approximately 12" of cord between the transformer and connecting block or connecting block and light.Also includes a 72" long cord that installs between the switch and connecting blockSwitch requires a 13/16" diameter hole for installation

$9.99
Buy
 

Related Products

WEST SYSTEM&reg Epoxy-Filler

WEST SYSTEM&reg Epoxy-Filler
$16.99

Highly trusted by boat-builders, WEST SYSTEM Epoxy is ideal for use as an ultra-tough waterproof coating, a high-strength, gap-filling adhesive or an easily sanded surface filler. The Resin works in conjunction with a variety of WEST SYSTEM Hardeners, Fillers and Pumps for a wide range of applications.The 105 Epoxy Resin is the base material of the WEST SYSTEM family. A clear, pale yellow, low-viscosity resin, 105 forms a high-strength solid with excellent moisture resistance, and is designed specifically for wood fiber, fiberglass, reinforcing fabrics and a variety of metals. 105 Resin105 Resin viscosity is approximately 1000 cP (centipoise) at 72°F (22°C).Coverage for "A" resin containers: Porous surfaces: 90-105 sq. ft. (8.5-10m2)Non-porous surfaces: 120-135 sq. ft. (11-12.5 m2)Coverage for "B" resin containers: Porous surfaces: 350-430 sq. ft. (32-40 m2)Non-porous surfaces: 462-550 sq. ft. (43-50 m2)Combined with 205 Fast, 206 Slow and 209 Extra-Slow Hardeners, the cure time of 105 can be fine-tuned and adjusted for a wide range of temperatures. For coating and roller applications, it can be combined with 207 Coating Hardener, which provides excellent thin-film characteristics to flow out and self-level without "fisheyeing." Cures clear to light amber, so you can achieve a natural wood finish when coating with varnish. 205 Fast HardenerPot life at 72°F (22°C) - 9 to 12 minutes.Cure to a solid state - 6 to 8 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 40°F (4°C).206 Slow HardenerPot life at 72°F (22°C) - 20 to 25 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 1 to 4 days.Minimum recommended temperature - 60°F (16°C).209 Extra-Slow HardenerPot life at 72°F (22°C) - 40 to 50 minutes.at 95°F (35°C) - 15 to 20 minutes.Cure to a solid state at 72°F (22°C) - 20 to 24 hours. at 95°F - 6 to 8 hours(35°C).Cure to maximum strength at 72°F - 4 to 9 days.Minimum recommended temperature - 70°F (21°C).206 Coating HardenerPot life at 72°F (22°C) - 22 to 27 minutes.Cure to a solid state - 9 to 12 hours.Cure to maximum strength - 4 to 7 days.Minimum recommended temperature - 60°F (16°C).When combined with 404 High Density Filler (optimum strength) 407 Low Density Filler (optimum volume) or 406 Colloidal Silica Filler (optimum versatility), WEST SYSTEM epoxy will bridge large gaps and voids and can be easily sanded and shaped when cured. It has no strong solvent odor, making it far safer and more pleasant to work with. Round out your set with the 300 Mini Pump Set, which includes one resin and two hardener pumps calibrated to dispense perfect ratios every time. Pumps mount directly on the resin and hardener containers, eliminating mess, and include extension tubes for various container sizes. NOTE: "A" and "B" sized resin containers correspond with "A" and "B" sized hardener containers. The 300 Mini Pumps can be configured to fit any size.

Triton TRPUL 3-1/4'' Unlimited Rebate Planer

Triton TRPUL 3-1/4'' Unlimited Rebate Planer
$169.99

With a blade that runs the full length of the bed, Triton's TRPUL Unlimited Rebate Planer can cut rabbets as deep as your heart desires, and also works great as a standard surface planer as well. It can hog off up to 1/8'' in a single pass, and features a 17-position depth control for fast, precise adjustment of the amount of material you want to remove. Simply repeat the passes until you reach the desired depth. The adjustable auxiliary handle adds comfort, while the integral parking stand prevents damage to the blade when you set the planer down. The blade drum can even be removed and replaced with the included sanding drum to allow easy sanding of the bottoms of your rabbets. Left or right rear dust extraction. Cutting capacities: width 3-1/4'', depth 1/8''. Weight 8.6lbs. 0-1/8'' Adjustable depth of cutVariable speed control adjusts the drum speed to suit the material3-blade drum provides a higher rate of material removal (46,500 cuts per minute)Bail handle for improved ergonomics and increased controlLeft or right rear dust extraction allows the dust/chips to be directed to either side of the workpieceDrum guard protects against exposed blades when rebatingSpindle lock button for easy drum changesParking stand protects the blades and workpiece from damage on run downPower-on neon light increases operator safety

Loox 3010 24V LED Puck Light

Loox 3010 24V LED Puck Light
$27.99

Offering easy plug-n-play installation, compact size, and soft, pleasing light, these LED puck lights are a go-to option for both task lighting and accent lighting. Use them under upper cabinets, inside glass cabinets or drawers, and to highlight artwork. Each light includes an integral 78'' cable, which can be extended with the optional extension leads (57395). Requires Hafele Loox 24V Driver and Switch (e.g. 59678 and 56850, sold separately). Easy to install; surface or recess mountedDriver plugs into wall outlet; no need for an electricianEnergy efficient with low heat outputLong lasting—up to 50,000 hoursDimmable with optional Dimmer Switch (56850)Optional Door Contact Switch (53213) turns light on when door is opened