The iVac Pro system eliminates the inconvenience of having to walk across the shop to turn on your dust collection system before operating a power tool. It also eliminates the chance that you will simply forego the dust collector to save a bit of time. Simply turn on your power tool and the Pro Tool Plus sends a wireless signal up to 40' to the Pro Switch (sold separately), which then powers up your dust collection system. Turn off your power tool, and the dust collector powers down. Here's how it works. The Pro Tool Plus is physically secured to the power cord of your power tool, and determines whether the tool is on or off by sensing the magnetic field surrounding the cord. Now plug your dust collection system into a Pro Switch (sold separately). In Auto Mode, when the power tool is turned on, the Tool Plus transmits a digital wireless signal to the Pro Switch instructing it to turn on and apply power to the Dust Collector. You can add a Pro Tool Plus to every tool that you want to have this capability. One Pro Switch can accommodate up to 8 Pro Tools, as long as they are within the 40' radio frequency range. You can even program your Pro Switch to run a little longer than your tool to allow for dust clearance. Get started today by selecting a Pro Switch in 240V or 115V and adding up to 8 Pro Tool Plus units. NOTE: IVac Pro System Boxes are built to handle the amperage advertised, however, both the UL (American) and CSA (Canadian) safety approval agencies require the boxes to be labeled at 80% of their actual amperage capacity due to the fact that the units have an attached power supply cord. Example - The 115 Volt / 20 Amp box is labeled as only 16 amps, however the box will actually continuously handle 20 amp AC mains. Automatically turns your dust collection system on or offWirelessly connect up to eight iVac Pro Tool Plus units (each sold separately) to an iVac Pro Switch for multi-tool coverageRun two or more power tools at the same time without interference (turning off one tool won't turn your dust collection system off if another tool is still runningTurn on delay helps avoid power surges from dust collector and power tool turning on at the same timeThree-position mode switch: Auto/Off/On40' line-of-sight range between the iVac Pro Switch and iVac Pro Tool Plus
Three varieties of 1-3/8" end cut blades for cutting a wide range of materials with your multi-tool. Use the Wood/Metal blades for cutting wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and hardened fillers, the Standard Wood blades for wood, plastic and drywall, and the Precision Wood blades for fine cutting of wood and soft plastics. Great for plunge cutting, shimming and precision cuts. Stepped profile allows the blade to cut flush with the surrounding surface. Designed for use with Rockwell Sonicrafter Multi-Tools RK5139K (46768) and RK5140K (48783). Universal Fit System also allows it to be used with almost any other multi-tool. Also available in packs of 3 (see below).Technical Details:1-3/8" end cut saw blade allows flush cuts, plunge cuts and precision cuts in a variety of materials.Capable of plunge cuts up to 1-5/8" deep.Stepped profile allows cuts flush to the surrounding surface.Use with Rockwell Sonicrafter Multi-Tools RK5139K (46768) and RK5140K (48783).Universal fit system adapts to fit other multi-tool brands.
Pre-honed to a mirror-like edge that turns out smooth shavings right out of the box, the Tri-Jack Pro is a new multi-tool in Flexcut's Carvin' Jack series. As itsname suggests, the Tri-Jack has three blades that lock in place: a roughing knife, a detail knife, and a mini cutting knife. The roughing knife is great for modeling surfaces and creating texture, while the detail knives allow the finest cuts. The well-designed handle minimizes hand fatigue and is made of aerospace-grade aluminum with a quarter-cut cherry inlay.Technical Details:The Flexcut Tri-Jack Pro has three folding blades: a roughing knife, a detail knife, and a mini cutting knife.Ergonomically designed handle is made of aerospace-grade aluminum with cherry inlay.Pre-honed and pre-sharpened so you can get right down to carving.