Cherry by the Piece-1/4" Thickness

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

$4.99
Buy
 

Related Products

Heavy Duty Shop Caster, Non-Swivel (Rigid without Brake)

Heavy Duty Shop Caster, Non-Swivel (Rigid without Brake)
$12.99

Made of skid-resistant rubber with zinc plated housings, these heavy duty shop casters support a hefty 175 pounds and feature a self-lubricating bearing for long life and trouble free rolling. Excellent for use with saws, planers or other heavy shop equipment, each caster wheel is 3" in diameter with a tread width of 1-1/4". Available in swiveling and non-swiveling models - both styles do not have brakes.Technical DetailsZinc plated housing with skid-resistant rubber wheelSupports 175 lbsAvailable in swiveling and non-swiveling modelsWheel is 3" diameter x 1-1/4" tread widthMounting hardware not includedSold individually

Rockler Roller Stand

Rockler Roller Stand
$64.99

You'll be able to handle almost any load with our Rockler Roller Stand! It's ideal for use with wide or long stock on table saws, band saws, planers and drill presses. The 220 lb capacity roller stand is constructed of 1-1/2" steel tubing for superior strength and stability as well as an adjustable height from 28-3/4" to 47".Features include: Tapered safety support prevents roller from dropping during adjustments. Roller stand supports up to 220-lbs. Unique leveling system compensates for uneven floors. Self-standing when closed. Folds flat for easy storage! Roller Stand Roller stand has 2" dia. x 11" W roller with spring-loaded axle. Great for drill presses, planers and joiners where stock comes directly off table.

Cherry by the Piece-1/4" Thickness

Cherry by the Piece-1/4" Thickness
$4.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.