Cherry by the Piece-3/4" Thickness

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

$9.99
Buy
 

Related Products

Tormek HTK-706 Hand Tool Kit

Tormek HTK-706 Hand Tool Kit
$215.00

With the six jigs in this kit, you'll be able to shape and sharpen all your knives, scissors, shears, draw knives and axes, as well as short chisels and carving tools. Each jig perfectly replicates the edge angle so you can sharpen faster than ever. The jigs in this kit work with the T-7 and T-4 Tormek Sharpening Systems (35254 and 53332, sold separately) as well as the older T-3 system. The Knife Jig (SVM-45) works to sharpen most knives, including carver's draw knives. Long knives need to be stiff, and the minimum blade length is 2-3/8'' (60mm)The Long Knife Jig (SVM-140) is suitable for long and flexible knives. The jig's 5-1/2'' (140mm) width stabilizes a thin blade. Requires minimum blade length of 6-5/16'' (160mm)The Scissors Jig (SVX-150) is for scissors of all sizes as well as shears. It is also suitable for portable electric hand planer bladesThe Short Tool Jig (SVS-32) is for straight-shanked carving gouges and V-tools down to 1-3/4'' (45mm) long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 1-1/4'' (32mm)The Axe Jig (SVA-170) sharpens carving and carpenter's axes. It accommodates a maximum axe height of 6-11/16'' (170mm), and copes with both straight and curved edgesThe Small Knife Holder (SVM-00) enables you to sharpen the smallest knife blades like carving knives and pocket knives. Works in conjunction with the SVM-45 Knife Jig

Powermatic 20'' Planer 5HP 3PH

Powermatic 20'' Planer 5HP 3PH
$2,839.99

This heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20" planing capacity will handle the most demanding work. The 5" dust port connects easily to any dust collector. The cutterhead has four high speed steel knives and turns at 5,000 RPM producing 20,000 cuts per minute. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel columns giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut.Knife setting gauge 5HP motor and 20" planing capacity for heavy duty work Fully enclosed base cabinet with integrated casters for shop mobility Cast iron table with extensions creates a big 55-1/2" x 20" working area Four feed speeds - 24 and 31 FPM, 16 and 20 FPM with gear change - provide versatility Feed rollers and cutterhead supported by full cast iron head assembly for rigidityProduct Specifications:Powermatic Part Number: 1791297Model Number: 209Brand: PowermaticHeight: 41.375"Width: 36.625"Length: 26"Net Weight: 770 lbs.Maximum Planing: 20"Maximum Planing Thickness: 8"Maximum Depth of Cut: 3/32"Minimum Planing Length: 6-3/4"Cutterhead Diameter: 3-3/16"Cutterhead Speed: 5000 RPMCuts Per Minute: 20000Feed Rate: 24 and 31 FPMNumber of Knives: 4Dust Port Outside Diameter: 5"Dust Collection Minimum: 900 cu.ft/minCFM Required: Blade Size: 20" x 1" x 1/8"Readout Scale: inch/metricTable Support: 4 columnNumber of Speeds: 4Motor Power: 5 HPMotor Phase: 3 PhMotor Voltage: 230 VPrewired Voltage: 230 VStandard Equipment: Single-sided knives 5" diameter dust port Cast iron extension tables

DeWalt DW7342 12-1/2'' Replacement DW734 Planer Blades

DeWalt DW7342 12-1/2'' Replacement DW734 Planer Blades
$70.99

DeWalt DW7342 Replacement Planer Blades are made of high quality M2 laminated steel providing prolonged life as well as sharpness. The hole pattern fits easily on the knife locating pins machined on the cutterhead. These replacement blades are designed to be turned over when dull to use the other side and replaced when both sides have been used. The DeWalt DW7342 replacement blades are designed to fit the DeWalt 734 12-1/2" Portable Planer.Technical Details:Measures 12.5" longdual angle 45 degree angle with 40 degree relief angleReversibleM2 laminated tool steelDesigned for use with the DeWalt 734 Portable Planer