Deulen Sharpening Jigs eliminate the cost and down-time of sending your jointer and planer knives away for sharpening, AND they bring the "scary sharp" sandpaper sharpening method to power tools. The process couldn't get any simpler. Just pop your planer or jointer knives into the two brass slots, cinch down the lock nuts, and with a few strokes on progressively finer sheets of sandpaper, you'll have an edge that rivals that of the finest handplanes. The jigs are available in 6" and 12" lengths for knives up to 16" in length, and the jigs can also be doubled up for longer knives. 18" long strips of PSA sandpaper are available below to be adhered to your own piece of plate glass, granite, or other flat sharpening surface.Technical Details: 6" Deulen Sharpening Jig handles knives up to 8" in length.12" Deulen Sharpening Jig handles knives up to 16" in length.For longer knives, the sharpening jigs can be piggy-backed. A progression of grits from 120 to 400 grit sandpaper is recommended for optimum sharpness.3-blade jointer knives can also be sharpened. If the knife is 8" or less, the 12" Deulen Sharpening Jig can handle three blades at once. For larger planer knives with three blades, a how-to video is included with a simple rotation system to ensure the knives are all sharpened equally.
Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection
Affordable attachment accurately displays the thickness of the board exiting the planer.Eliminates the need for tape measure or calipers.Measurements in inches or mm.Features absolute measuring mode with memory and incremental mode that re-sets to 0.000" or 0.00 mm. Calibrates in seconds.Fits portable planers from DeWalt, Delta, Ridgid, Ryobi, Craftsman and more.Mounts in minutes.Includes readout, stainless steel scale, graphic scale sticker, sheet metal mounting parts, hardware and manual.Now uses AAA Batteries for operation (not included). Provides up to 2 years of battery life.