We're bundling the Tormek T-7 Sharpening System with the Tormek Woodturner's Accessory Kit, and Handtool Kit to save you money and give you enhanced accuracy, convenience and versatility! With the T-7's new Square Edge Jig, your blades will be automatically squared to the grinding wheel without the need for picky adjustments. Since chisels and plane blades are mounted with their flat backs against a large, flat reference surface, there is no risk of rocking or tipping once the jig is tightened down. The T-7 also includes the new Truing and Dressing Tool, which uses a diamond cutter to return worn, out-of-round wheels to like-new condition. Precision screw feed allows you to grade the wheel for a fine or coarse grade by simply varying the rate of feed. Plus, the standard system now includes the SP-650 Stone Grader. Simply press it onto the wheel to grade the wheel up to 1000 grit and flip it over to return the wheel to coarse grinding. The Woodturner's Accessory Kit includes a Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in edge geometries, a Profiled Leather Honing Wheel (LA-120) for honing and polishing the flute on gouges, a Machine Cover (MH-380), a Multi-Jig (SVS-50) for skew chisels with a straight or curved edges, and a book and DVD. The Handtool kit includes a knife jig, long knife jig, scissors jig, short tool jig, and an axe jig.T-7 Sharpening System Details:Square Edge Jig accepts blades up to 76mm or 3" in widthSquare Edge Jig features safety stops, which prevent the tool from slipping off the stoneTruing and Dressing Tool with screw feed: Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stoneStainless steel hardware: Prevents rust and wear on bearingsUniversal Support with acme thread: Round section without flat machining makes it faster to change positionImproved Horizontal Base: Double locking screws and tighter fit for maximum precisionMicro Adjust with scale: For a predetermined cutting depth when using the TT-50 Truing and Dressing Tool7-year warranty applies to all customers, including industrial usersWoodturner's Accessory Kit Details:Shape and sharpen all your turning toolsGouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges - maximum tool width is 25mmTool Rest (SVD-110) for scrapers, hollowing tools, and thin parting toolsTurning Tool Setter (TTS-100T) with built-in edge geometriesProfiled Leather Honing Wheel (LA-120) for honing and polishing the flute on gougesMulti-Jig (SVS-50) for skew chisels with a straight or curved edgesIncludes a book and DVD devoted exclusively to sharpening turning toolsMachine Cover (MH-380) keeps your sharpening tools dust free when not in useHandtool Sharpening Kit Details:The Knife Jig works to sharpen most knives, including carver's draw knives. Long knives need to be stiff, and the minimum blade length is 60 mmThe Long Knife Jig is suitable for long and flexible knivesThe jig's 140 mm width stabilizes a thin blade. Requires minimum blade length of 160 mmThe Scissors Jig is for scissors of all sizes as well as shears. It is also suitable for portable electric hand planer bladesThe Short Tool Jig is for straight-shanked carving gouges and V-tools down to 45 mm long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 32 mmThe Axe Jig sharpens carving and carpenter's axes. It accommodates a maximum axe height of 170 mm, and copes with both straight and curved edges
DeWalt DW7342 Replacement Planer Blades are made of high quality M2 laminated steel providing prolonged life as well as sharpness. The hole pattern fits easily on the knife locating pins machined on the cutterhead. These replacement blades are designed to be turned over when dull to use the other side and replaced when both sides have been used. The DeWalt DW7342 replacement blades are designed to fit the DeWalt 734 12-1/2" Portable Planer.Technical Details:Measures 12.5" longdual angle 45 degree angle with 40 degree relief angleReversibleM2 laminated tool steelDesigned for use with the DeWalt 734 Portable Planer
The distinctive striped appearance of Zebrawood has made it a favorite for decorative inlays and veneers. The color ranges from golden-yellow to a peanut butter tone with chocolate veins running through it. The wood is hard, dense and extremely tough. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about tearout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Native to: West Africa, especially Gabon and Cameroon.Tree Data: 48" to 60" diameter trunk. The trees generally have very thick bark.Sapwood: Pale yellow.Heartwood: Light golden-yellow or pale yellow-brown, with narrow streaks of dark brown to almost black, giving a striped appearance.Grain: Generally interlocked or wavy, yielding a ribbon figure. Texture: Medium to coarse. Luster: High luster.Resin: Occasional resin pockets.Movement: Dimensionally stable. Retains its shape well after machining.Veneering Qualities: Zebrawood is used extensively in veneers for cross banding and inlays. Bundles of veneer should be stabilized with weights to prevent buckling.Working characteristics: Responds well to hand and machine tools. Quite easy to saw, but due to interlocking grain, planing is very difficult, often resulting in tearout.Polishing: Good polishing and finishing qualities. Strength: Compressive strength parallel to the grain is high. The wood is hard, very heavy, and very dense. It is tough, with good impact resistance.
With the six jigs in this kit, you'll be able to shape and sharpen all your knives, scissors, shears, draw knives and axes, as well as short chisels and carving tools. Each jig perfectly replicates the edge angle so you can sharpen faster than ever. The jigs in this kit work with the T-7 and T-4 Tormek Sharpening Systems (35254 and 53332, sold separately) as well as the older T-3 system. The Knife Jig (SVM-45) works to sharpen most knives, including carver's draw knives. Long knives need to be stiff, and the minimum blade length is 2-3/8'' (60mm)The Long Knife Jig (SVM-140) is suitable for long and flexible knives. The jig's 5-1/2'' (140mm) width stabilizes a thin blade. Requires minimum blade length of 6-5/16'' (160mm)The Scissors Jig (SVX-150) is for scissors of all sizes as well as shears. It is also suitable for portable electric hand planer bladesThe Short Tool Jig (SVS-32) is for straight-shanked carving gouges and V-tools down to 1-3/4'' (45mm) long. It also sharpens short wood chisels and tools for power carvers. Maximum tool width is 1-1/4'' (32mm)The Axe Jig (SVA-170) sharpens carving and carpenter's axes. It accommodates a maximum axe height of 6-11/16'' (170mm), and copes with both straight and curved edgesThe Small Knife Holder (SVM-00) enables you to sharpen the smallest knife blades like carving knives and pocket knives. Works in conjunction with the SVM-45 Knife Jig