The AutoRoute series of CNC machines from Axiom offers advanced features usually found only on machines in industrial environments, but at consumer-friendly prices. The AutoRoute 6 Pro is the mid-sized Pro model. With XYZ travel of 24'' x 36'' x 6'', and a powerful 3HP electro-spindle, it is perfect for a wide variety of parts, including guitar bodies. A computer need not be attached to the CNC to operate it. Instead, simply transfer your file to the included handheld controller via USB. The RichAuto A11 controller is an easy-to-use, robust controller with nearly a decade of proven results in demanding applications. It is more stable than a PC, and no updates are required. Every Axiom AutoRoute CNC machine also offers precision ball screws, prismatic guides, robust, rigid steel frames, and interlocking aluminum tables. In addition, the integrated MDF spoil boards promise exacting precision, as they can be milled flat for true perpendicularity with the spindle. Whether you're looking to upgrade your entry-level CNC, or you just want to start out with a machine that promises top-quality results and ease of use, you're sure to be pleased with the AutoRoute series from Axiom. Includes powerful 3HP (2.2 KW) Electro Spindle with 1/4'' and 1/2'' ER20 colletsIntegrated Liquid Cooling System for maximum life even under the most demanding conditions0-24,000 RPM variable speed control lets you adapt the router speed to the applicationFeatures precision ball screws, plus prismatic guides on all axesWelded structural steel frame for less vibration and greater accuracyInterlocking aluminum table accepts T-track accessoriesCast gantry supports for maximum rigidityIntegrated MDF spoil board can be machined flat for precise perpendicularity with spindle200 IPM maximum feed rate (3.3'' per second)6.5'' gantry clearance and 6'' of Z-axis travel for compatibility with tall workpiecesAutomatic Tool Touch-Off Puck makes it easy to zero out the Z-axisIncludes Axiom industrial CNC controller with handheld control unit Software and Stand are not included with the machines. Two software packages are available: VCarve Pro 8.0 (Item #58150) Photo VCarve (Item #54822
These heavy-duty, state-of-the-craft cutters produce perfect tenons with 60° tapered shoulders for the sturdiest-possible log furniture construction. The funnel shaped, self-centering design ensures flawlessly shaped tenons, and dual precision-ground blades cut twice as fast as single blade models and stay sharp longer. Plus, as part of the cutters' exclusive "IN-SIGHT" visual measurement system, slots along the shaft combine with radial grooves at 1/2" intervals to let you to see your progress and measure tenon length while you cut. Body is CNC machined from aircraft aluminum for maximum strength and minimum weight. Available in three sizes (1", 1-1/2", and 2") corresponding to the diameter tenon that each will cut.
The Grr-Ripper Gravity Heel Kit provides a positive hook that grips the end of your board, ideal when you need additional support for feeding hard or heavy stock through your table saw, bandsaw or router table. The heel drops down automatically, aided only by gravity, and retracts when placed in the middle of the board. This means there's no need to remove it or adjust it when it's not needed. The Gravity Heel can also be adjusted laterally to provide backup support when you wish to prevent grain blowout of any kind. Simply saw through the heel to provide zero-clearance support. Five sacrificial heels are included, plus two heel spacers and mounting hardware. Fully adjustable for stock thicknesses from 0-1''Fits all existing Grr-Ripper push blocksEasy to use with two push blocks and the leapfrog method; heels grab the tail end of your board and automatically retract mid-boardIncreases control and stability when feeding long or short stock-provides extra support to help feed stock and prevent blow out
The CNC Shark Touch Probe attaches to the router in any CNC Shark Routing System to trace objects down to 0.001" detail allowing the user to import image data for replicating objects, shapes and patterns. Simply program the Shark to operate at the same detail level as the Touch Probe scan to reproduce the object later. Works well for replicating basic shapes for carvings or reproducing damaged areas on antiques or other irreplaceable items. Requires Cut 3D Software or similar software to be used with the CNC Shark models. Made in the USA. NOTE: To avoid accidents or injury, always be sure to unplug the router prior to attaching the Touch Probe. Touch Probe is compatible with the following machines: CNC Shark Routing System CNC Shark Pro Plus Routing System CNC Shark HD 2.0 Routing System The probe does not work with the 54111 CNC PiranhaIntroducing CNCSharkTalk.com, a new website presented by Rockler where CNC Shark users can chat together, watch how-to videos, ask questions, learn from each other and even show off their CNC Shark projects.