CNC Shark HD3

The CNC Shark HD3 includes the NEW Virtual Zero software. This new and improved software ''maps'' the surface of your table or workpiece and uses the map as a dynamic reference point. This eliminates problems caused by warped or bowed workpieces and small inconsistencies in the table. It also allows you to carve and machine stock that is intentionally convex to begin with. A new electronics package expands the capabilities of the CNC Shark and allows attachments like a pendant control system.The CNC Shark HD3 also features a new gantry reinforced with plate aluminum and a sturdy interlocking table that is much heavier than prior models for more accuracy and less flex. It has anti-backlash, wear-compensated leadscrews on all axes and is built to handle larger routers such as the Porter Cable 890 series, Bosch 1617 series or large water-cooled spindles. To accommodate the greater torque levels, it features adjustable bearings to give more stability during heavy cutting. Perfect for carving and machining a large variety of projects made from wood, soft metals or plastics. Simply supply a PC computer with USB 2.0 port and any of the routers listed below, connect the USB cable to the controller box and load the software.Includes VCarve 8 Desktop, Vector Art 3D Sampler Pack and CNC Shark control software with Virtual Zero technology.Fully compatible with the following routers (sold separately): Bosch 1617 and 1618 Porter Cable 890 Series Porter Cable 690 Series (6902VS must be manually started) DeWalt 610, 616, 618FREE CNC Project Plans from Woodworker's Journal: Butler's Tray Weather Station Cribbage Board Workshop Jig Modern Table Outlet Cover Luggage Tags Chinese Checkerboard Puzzle TrayVisit the CNC Shark Forum CNCSharkTalk.com, a website presented by Rockler where CNC Shark users can chat together, share files, watch how-to videos, ask questions, learn from each other and even show off CNC Shark projects.

$3,999.99
Buy
 

Related Products

PhotoVCarve Software for CNC

PhotoVCarve Software for CNC
$149.00

PhotoVCarve allows CNC machines to carve and engrave photographic images in a way that used to only be possible with expensive laser marking systems. The software converts photographs and images into high-quality toolpaths for virtually all CNC machines, using lines and grooves that vary in width and depth to represent the detail in an image. PhotoVCarve is also perfect for machining 3D Lithophanes directly from photographs for lasting gifts, keepsakes and mementos. Whether you're a hobbyist or a professional engraver, you'll enjoy the simplicity, utility and quick results of PhotoVCarve. V-Groove Machining: Uses grooves of varying width and depth to represent detail. Automatically calculates toolpaths based on cutter selected and maximum depth of groove. Quality of finished result is dependant upon a high level of contrast between material surface and machined grooves.3D Lithophane Machining: Lithophanes are 3D photographs that when viewed in normal lighting look rather flat, but when back lit transform into stunning 3D pictures with depth and detail that cannot be seen in a 2D photograph.3D Grayscale Machining: PhotoVCarve automatically converts a grayscale image into a 3D height map that can then be carved.

1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits
$6.99

This unique collet reducer lets you to use the wide array of proprietary Click-N-Carve CNC Router Bits with the larger CNC Shark line of routers, as well as any other CNC router or handheld router with a 1/4" collet. It reduces the collet opening from 1/4" to 4mm to accept the smaller Click-N-Carve shank. The Click-N-Carve selection offers many unique router bits, including Ball Nose Bits, End Mill Bits, Conical Ball Bits, and Half-Conical Bits for CNC Carving Machines.Technical Details:Collet reduces your standard 1/4" collet to a 4mm collet, which accepts the unique Click-N-Carve router bit shanks.Compression slots in collet reducer allow for tight fit when the collet is tightened.

Grr-Ripper Gravity Heel Kit

Grr-Ripper Gravity Heel Kit
$15.99

The Grr-Ripper Gravity Heel Kit provides a positive hook that grips the end of your board, ideal when you need additional support for feeding hard or heavy stock through your table saw, bandsaw or router table. The heel drops down automatically, aided only by gravity, and retracts when placed in the middle of the board. This means there's no need to remove it or adjust it when it's not needed. The Gravity Heel can also be adjusted laterally to provide backup support when you wish to prevent grain blowout of any kind. Simply saw through the heel to provide zero-clearance support. Five sacrificial heels are included, plus two heel spacers and mounting hardware. Fully adjustable for stock thicknesses from 0-1''Fits all existing Grr-Ripper push blocksEasy to use with two push blocks and the leapfrog method; heels grab the tail end of your board and automatically retract mid-boardIncreases control and stability when feeding long or short stock-provides extra support to help feed stock and prevent blow out