Powermatic Air Filtration System

Your shop may look clean, but how clean is the air? The PM1200 Air Filtration System traps up to 99% of all 5-micron particles and 85% of all 1-micron particles for a healthier work environment. Three blower speeds modify air flow. The unit can be operated either at the cabinet or with the remote transmitter, which uses radio frequency, eliminating the need for line-of-sight operation. The timer has nine settings, allowing continuous operation for up to 9 hours while you're away, and will shut off at the end of that period. The filter guards can be removed and installed without tools, for instant filter access.Features:Two-filter system traps particles as small as 1 micronRemote control operates on radio frequency for wider range of effectivenessTimer has nine settings, for up to nine hours of continuous operationInner filter has fine mesh pockets for high efficiency, can be blown cleanElectrostatic outer filter is disposableDiffusion filter disperses exhausted airFour eye bolts allow suspension from shop ceilingIndicator lights up after 200 hours to remind user to replace filtersThree blower speeds to modify air flowFilter guards install and remove easily without tools for quick access to filtersTwo carry handles for portabilityFully enclosed motor has overload protection for long service life.

$439.99
Buy
 

Related Products

Industrial Series Log Tenon Cutters

Industrial Series Log Tenon Cutters
$259.00

These heavy-duty, state-of-the-craft cutters produce perfect tenons with 60° tapered shoulders for the sturdiest-possible log furniture construction. The funnel shaped, self-centering design ensures flawlessly shaped tenons, and dual precision-ground blades cut twice as fast as single blade models and stay sharp longer. Plus, as part of the cutters' exclusive "IN-SIGHT" visual measurement system, slots along the shaft combine with radial grooves at 1/2" intervals to let you to see your progress and measure tenon length while you cut. Body is CNC machined from aircraft aluminum for maximum strength and minimum weight. Available in three sizes (1", 1-1/2", and 2") corresponding to the diameter tenon that each will cut.

Grr-Ripper Gravity Heel Kit

Grr-Ripper Gravity Heel Kit
$15.99

The Grr-Ripper Gravity Heel Kit provides a positive hook that grips the end of your board, ideal when you need additional support for feeding hard or heavy stock through your table saw, bandsaw or router table. The heel drops down automatically, aided only by gravity, and retracts when placed in the middle of the board. This means there's no need to remove it or adjust it when it's not needed. The Gravity Heel can also be adjusted laterally to provide backup support when you wish to prevent grain blowout of any kind. Simply saw through the heel to provide zero-clearance support. Five sacrificial heels are included, plus two heel spacers and mounting hardware. Fully adjustable for stock thicknesses from 0-1''Fits all existing Grr-Ripper push blocksEasy to use with two push blocks and the leapfrog method; heels grab the tail end of your board and automatically retract mid-boardIncreases control and stability when feeding long or short stock-provides extra support to help feed stock and prevent blow out

CNC Shark Touch Probe

CNC Shark Touch Probe
$299.99

The CNC Shark Touch Probe attaches to the router in any CNC Shark Routing System to trace objects down to 0.001" detail allowing the user to import image data for replicating objects, shapes and patterns. Simply program the Shark to operate at the same detail level as the Touch Probe scan to reproduce the object later. Works well for replicating basic shapes for carvings or reproducing damaged areas on antiques or other irreplaceable items. Requires Cut 3D Software or similar software to be used with the CNC Shark models. Made in the USA. NOTE: To avoid accidents or injury, always be sure to unplug the router prior to attaching the Touch Probe. Touch Probe is compatible with the following machines: CNC Shark Routing System CNC Shark Pro Plus Routing System CNC Shark HD 2.0 Routing System The probe does not work with the 54111 CNC PiranhaIntroducing CNCSharkTalk.com, a new website presented by Rockler where CNC Shark users can chat together, watch how-to videos, ask questions, learn from each other and even show off their CNC Shark projects.