Bench Dog Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

Meet the ultimate router table - complete with a fence, plate, steel cabinet, and a router lift! At 24" x 32" x 1-1/2", the Bench Dog Cast-Iron Router Table is the largest, flattest, and most durable option on the market. Weighing in at nearly 100 lbs, the one-piece top provides more than 5 square feet of ultra-flat work surface. Add to that the included steel cabinet with it's unique internal dust bucket, and you have something that looks more like an industrial shaper than a router table. Its 12-point plate-leveling/locking system guarantees a secure, flush interface with the included Bench Dog ProLift Router Lift. ProLift is compatible with Porter-Cable 7518 & 7519; adapters for other routers available separately. Plus, you get the 32" ProFence, a precision-milled aluminum fence with two MDF sub-fences, front and rear T-tracks, a 2-1/2" dust port and an integrated bit guard.If you're after the ultimate table top - the pinnacle of size, stability, and durability - look no further than the ProMax RT. Weighing in at nearly 100 pounds, it's built from one solid piece of 1-1/2" thick cast iron to absorb vibration better than any table on the market. The end result? A long working life of incredibly smooth operation. Plus, it's loaded with features:Dual T-tracks in the table: a standard miter slot and a Universal T-track for accessories.Cast iron table top measures 24" x 32" x 1-1/2" - over 5 square feet of surface area.Universal T-tracks accept 1/4" and 5/16" T-bolts as well as 1/4" hex bolts-perfect for hold-downs, stops, featherboards and more.32" Pro Fence is precision machined for flatness and squareness, and includes front- and rear-mounted universal accessory T-tracks.Enclosed steel cabinet is built of solid galvanized steel.Cabinet includes integrated dust bucket for superior dust collection.Two integral casters allow you to tip and roll the entire router table.

$1,249.99
Buy
 

Related Products

Micro Jig GRR-Ripper Advanced 3D Push Block System GR-200

Micro Jig GRR-Ripper Advanced 3D Push Block System GR-200
$79.99

This advanced model of the GRR-Ripper boasts all of the same innovative features of the GR-100 but comes with two additional accessories (see below) that improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200) is designed to feed your workpiece more safely and more accurately than with conventional push blocks, resulting in intact fingers, less burning and less waste. With its 3-Directional control, it gives you downward, forward, and lateral pressure on the stock for maximum control. Since it acts as a movable blade guard that travels with your hand, it provides an additional safety buffer between the blade and your hands. Whether you are making razor-thin veneer strips, building miniatures, or creating exquisite furniture you will save time, materials, and fingers with the GRR-Ripper.The GR-200 includes these additional accessories:The Adjustable Spacer - This accessory adds increased gripping surface for tackling larger stock. It also adds one inch of cutting width to the GRR-Ripper and acts as a secondary balance support for small stock and straight-line ripping. Great add-on for working on the router table, and eliminating snipe.The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Perfect for trickier cuts like resawing, bevel edging, pattern routing, and much more.The Stabilizing Plate also acts as a secondary fence that travels with the GRR-Ripper along the left side of the stock. It holds the off-cut piece in its original position through the entire cutting operation. Some users call it a "Feather Board Plate," but unlike a featherboard, it exerts no sideways pressure. Instead it simply holds the drop-off piece in position as it travels past the blade, preventing binding.Watch a video demo today by clicking on the "Videos" tab above.

Freud 97-260 3-Pc. Door Router Bit Set - 1" H x 1/2" Shank

Freud 97-260 3-Pc. Door Router Bit Set - 1" H x 1/2" Shank
$201.97

Set contains Premier Adjustable Ogee Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Ogee Raised Panel Bit with back cutter.

Freud Bevel Trim Router Bits - 1/4" Shank

Freud Bevel Trim Router Bits - 1/4" Shank
$28.97

When it comes time to trim your plastic laminates, you want a clean, finished edge that feels as nice as it looks. These Freud Bevel Trim Router Bits are the perfect candidates. Available in bevels of 8°, 15° and 45°, the bits cut all plastic laminates and can be used with handheld routers, table-mounted portable routers and compact laminate trimmers. 1/2" bearing guide.TiCo Hi-Density carbide for longer bit life and a flawless finish.Perma-SHIELD Non-stick Coating protects from heat, gumming and corrosion.Each bit is computer-balanced and precision-ground for the smoothest possible cuts.