Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.
Set your router bit to the precise height every time for accurate lock miter joints! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit. Jig works for 3/4" stock on one side and 5/8" stock on the other. Made of durable HDPE and measures 2" x 3-7/8" x 3/4".
Give your furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, crown molding, door casings, trim, pilasters, window casing/sills, baseboards and picture frames, you can use the full profile, or just a portion of it to achieve the look you want. Features two flutes and a 3/8" ball bearing guide.
If you need to trim a precise amount of wood off of doors and large panels, this kit will save you a lot of tedious setups and backaches. The kit uses a razor-sharp shear-cutting bit along with different bearing combinations to remove exactly 1/16", 1/8", or 3/16" of material in just two router passes-all without a straightedge! No need to strain your back lifting and balancing a large panel on top of a jointer. Instead, you bring the tool to the material. The kit includes one carbide router bit and five bearings to set up the various depths of cut. The bit can also be used as a double-bearing flush trim bit, as two bearings are included for that purpose. Capable of trimming stock up to 1" thick. Click the "Videos" tab to see how this kit will save you time!A larger version of the same kit is available separately (26841) for trimming stock up to 2" thick.Small Bit Kit includes the following:One 3/4" diameter bit with 1" long cutter and a 1/2" shankTwo 3/4" bearings for flush trimmingThree single bearings (5/8", 1/2", and 3/8" in diameter) for trimming 1/16", 1/8", and 3/16"