Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.
Mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks.
When template work is in the picture, nothing beats the simplicity and utility of a router template guide bushing. With no moving parts to break, router bushings pump out part after identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters (see below) for different bits, dovetail jigs and other template routing applications. They fit perfectly in any router base with a 1-1/4" diameter center hole. Locking nuts are sold separately (#63107).Technical Details:Available in a wide range of diameters to fit different bits.Fits into any router base with a 1-1/4" diameter center hole.Locking Nuts are sold separately (#63107).
Necessary accessory to mount the following routers in the Bench Dog ProLift router lift (28827, sold separately):Porter-Cable 690 SeriesPorter-Cable 890 SeriesBosch 1617Bosch 1618DeWalt 610DeWalt 616DeWalt 618