Dewalt DW616 Heavy-Duty 1-3/4 HP maximum motor HP Fixed Base Router

Heavy-Duty 1-3/4 HP (maximum motor HP) Fixed Base Router3 Year Limited Warranty1-3/4 HP (maximum motor HP), 11 amp motor provides the power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64" incrementsAdjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-lockingIncludes:DW616M motor packDW6184 fixed base1/4" and 1/2" colletssub-base concentricity gauge2 wrenchesFeatures & Benefits:1-3/4 HP (maximum motor HP), 11.0 Amp motor provides the power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset locationAdjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-lockingQuick release motor latches for fast and easy motor pack removal for bit and base changesDetachable cordset offers cordset serviceability and the ability to use the same motor pack for all basesSub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy

$149.99
Buy
 

Related Products

Rockler Signmaking Carbide Router Bits - 1/4" Shank

Rockler Signmaking Carbide Router Bits - 1/4" Shank
$15.99

Specially designed for signmaking applications, with a flatter bottom to prevent peaks in routed letters. Recommended for use with plunge router. 1/4" shank.The 3/8" Signmaking Carbide Router Bit is required for the 2-1/4" Rockler Interlock Signmaker's Templates - State Park Font Kit (48356, sold separately).The 5/8" Signmaking Carbide Router Bit is required for the 3-3/8" Rockler Interlock Signmaker's Templates - State Park Font Kit (43820, sold separately).

Rockler Router Table Box Joint Jig

Rockler Router Table Box Joint Jig
$79.99

For use on virtually any router table with a standard 3/4" miter slot, this jig features a smooth-sliding backer sled and three precision-machined aluminum indexing keys to give you air-tight joints with either 1/4", 3/8" or 1/2" spacing. Works with stock up to 3/4" thick. For compatibility, the near edge of your table's miter track must be between 4-1/2" and 6-1/4" from the center of the bit.Stable MDF platform has low-friction melamine coating for added durability and easy cleanup.ABS plastic backer sled provides ample support, and is also predrilled for a sacrificial faceEasy-grip knobs lock platform into miter slotPlatform measures 10-3/4" x 12-3/8" x 1/2"Includes all necessary mounting hardwareThe jig requires a straight router bit to match the size of the indexing key.Up-cut spiral bits deliver the cleanest cuts and prevent blowout.

Rockler Rabbeting Router Bit Set - 1/2" Shank

Rockler Rabbeting Router Bit Set - 1/2" Shank
$49.99

With a full 1" of carbide length and four interchangeable bearings, this rabbeting bit is capable of cutting in horizontally at 5/16", 3/8", 7/16" and 1/2" increments, and up to 1" vertically, infinitely adjustable with your router. The carbide is ground to a fine edge to provide the longest possible cutting life, and smooth, burn-free rabbets. It features a rugged 1/2" shank that cuts vibration for the smoothest possible cut. A hex wrench is included for swapping the bearings.