Heavy-Duty 1-3/4 HP (maximum motor HP) Fixed Base / Plunge Router Combo Kit3 Year Limited Warranty1-3/4 HP (maximum motor HP), 11 amp motor provides the power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64" incrementsIntegral, through-the-column dust collectionAdjustable tool-free steel motor cam lockIncludes:DW616M motor packDW6184 fixed baseDW6182 plunge base1/4" and 1/2" collets2 wrenchessub-base concentricity gaugeFeatures & Benefits:1-3/4 HP (maximum motor HP), 11.0 Amp motor provides the power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset locationAdjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-lockingQuick release motor latches for fast and easy motor pack removal for bit and base changesIntegral, through-the-column dust collection collects 95% of the dust and provides superior bit visibilityDetachable cordset offers cordset serviceability and the ability to use the same motor pack for all bases
Create signs and table tops with decorative edging in almost half the time with this unique 5-Piece CNC Router Bit Set from Rockler. The set includes three innovative dual-purpose bits, which simultaneously cut your parts to size and apply one of three edge profiles: 1/2-inch cove, 45° chamfer or 1/2-inch roundover. There's no need to remove the parts to machine them again on a traditional router table. Also included in the set are two signmaking bits - a 60° V-groove bit, and a flattened round nose bit-perfect for routing letters or applying other decorative effects, such as scrolling and borders. All five CNC bits come packaged in an attractive wooden case with designated spots for each bit. 1/2-inch shanks. Cuts parts to correct dimension and shape, and applies an edge profile - all in one shot! No need for a bearing guide means no gummed up bearings, and no marks on the edge of your work piece from bearings that don't spin well. All five CNC router bits feature 1/2-inch shanks for stability, and 2 carbide flutes fora long cutting life.Note: For best results and longer tool life we recommend slowing the feed rate while making several passes.
At 28" x 40", it's large enough to accommodate any CNC Shark, as well as most other consumer CNC routers. Your controller hangs conveniently below the table in a saddle-shaped bracket, and is easy to access for emergency shut-downs. With its sturdy steel stand as a foundation, you'll get rock-solid stability, and plenty of storage potential, and the included leveling feet ensure that your router bed stays flat for precise results.MDF Top:Table top measures 28" x 40". Top is made of 1-1/8" thick melamine-coated MDF with 3mm black edge banding.Steel Stand (included):Steel base measures 24"W x 36"L x 32"H.All legs and stretchers are pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts. Legs are heavy-duty 1/8" steel to support any shop application. Includes 4" x 1/2" heavy-duty adjustable levelers for various height settings.Includes four 32" legs and all mounting hardware (carriage bolts and nuts).Top stretchers can be mounted flush with top or 4" down to add drawer or woodworking vice. All parts coated with durable black sand paint. Optional casters can be mounted in place of the adjustable feet (47034, sold separately).CNC Controller Bracket:Compatible with controllers for CNC Shark routers.Inside width of CNC Controller Bracket is 11-3/4".Inside height is 5-1/2", which leaves space for the controller to hang below the top stretcher.Sturdy steel construction.
Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor, and allowing you to spin the bit at higher RPMs. This means you can raise panels with an ordinary 2 HP router mounted in a router table. Precision machining paired with a sturdy 1/2" shank ensure smooth, chatter-free cuts. Note: vertical panel raising bits cannot be used for cathedral-style or arched doors.