A light, ergonomic compact router with variable speed control, plus a full-featured plunge base-the ultimate handheld powerhouse! Smooth-sliding plunge base has rubber handles, a five-step turret stop, and sliding depth-rod with micro-rod for fine adjustments. LED lighting in base with clear sub-bases for optimum visibility. Powerful 1-1/4 hp motor is perfect for trimming laminate, cutting flutes, edge profiling and even mortising. All-metal motor can is designed for durability, and motor features soft-start and electronic speed control to maintain speed under load. Intuitive depth adjustment ring, quick-release tabs and adjustable clamp make adjustments a snap. 1/4" collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes.
The CNC Shark Touch Probe attaches to the router in any CNC Shark Routing System to trace objects down to 0.001" detail allowing the user to import image data for replicating objects, shapes and patterns. Simply program the Shark to operate at the same detail level as the Touch Probe scan to reproduce the object later. Works well for replicating basic shapes for carvings or reproducing damaged areas on antiques or other irreplaceable items. Requires Cut 3D Software or similar software to be used with the CNC Shark models. Made in the USA. NOTE: To avoid accidents or injury, always be sure to unplug the router prior to attaching the Touch Probe. Touch Probe is compatible with the following machines: CNC Shark Routing System CNC Shark Pro Plus Routing System CNC Shark HD 2.0 Routing System The probe does not work with the 54111 CNC PiranhaIntroducing CNCSharkTalk.com, a new website presented by Rockler where CNC Shark users can chat together, watch how-to videos, ask questions, learn from each other and even show off their CNC Shark projects.
Application: Mill base or traditional "mop" boards in any width. Ideal for renovators who need to match old, extra-high base moldings. Bits can be used to rout base cap only, or to profile the edge of wide base molding. Choose your favorite wood to suit the room. Use with hardwood or softwood to mill stain grade molding. Use with table mounted, CNC or automatic routers. Note: For best results make two or more passes.
With its integral 1/2" guide bearing, this beading bit is a snap to use. There is no need to set the depth of cut with a fence, and you can even use the bit without a router table at all. The bit also features a taller section at the top of the carbide, which allows you more freedom to adjust the size of the upper step. Of course, you can also adjust it flush if no step is desired. A classic profile for cabinet work and architectural features, it makes an ideal beaded molding for wrapping doors and drawer fronts. These bits feature 1/2" shanks, the ideal choice when more stability and the best cut quality are desired.