DeWalt DWP611PK Compact Router w/Fixed and Plunge Bases:A light, ergonomic compact router with variable speed control, plus a full-featured plunge base - the ultimate handheld powerhouse! Smooth-sliding plunge base has rubber handles, a five-step turret stop, and sliding depth-rod with micro-rod for fine adjustments. LED lighting in base with clear sub-bases for optimum visibility. Powerful 1-1/4 HP motor is perfect for trimming laminate, cutting flutes, edge profiling and even mortising. All-metal motor can is designed for durability, and motor features soft-start and electronic speed control to maintain speed under load. Intuitive depth adjustment ring, quick-release tabs and adjustable clamp make adjustments a snap. 1/4'' collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes.Router Type: Combination (Fixed & Plunge) Power Used (Amps): 7 Operating Input Voltage: 110 volt / 120 volt at 60hz (North America) Horsepower: 1.25 HP RPM (Rotations Per Minute): 16,000 to 27,000 Collet Diameter: 1/4'' Plunge Stroke 2'' Spindle Lock: Yes Collet Capacity: 1/4'' Base Dimensions: 4'' standard and 4-3/8'' x 5-3/4'' plungeRockler Trim Router Table:Get more out of your compact router with a rugged, adjustable Trim Router Table that goes anywhere! A Rockler Exclusive, pre-drilled holes on the back of the Trim Router Table let you attach a clamping strip for quick use on the edge of a bench, a table, a piece of plywood, or the tailgate on your truck. Perfect for small applications like routing round overs, chamfers, and small dadoes in your shop or at the job site. Sets up quickly yet it's just as easy to detach your router from the table without tools. Use your router with the included 1/4'' thick acrylic base to do freehand work like a standard router. The acrylic base not only provides a wide, level base for freehand work, it's pre-drilled to fit most popular trim routers. Also includes an adjustable fence that's compatible with the Rockler Router Table Dust Port (21528).The 3/4'' x 11-1/2'' x 15-1/2'' table is made of durable vinyl wrapped MDFPre-drilled holes on the back side of the table allow you to attach an auxiliary clamping strip for securing to any work surfaceThe 1/4'' thick acrylic base has a 1-1/2'' opening that accommodates most trim style router bitsFits the Bosch Colt, Porter Cable 450 and 7310, DeWalt DW 611, and other popular trim routers, or drill the base to fit your specific routerRouter Table Dust Port:Keep your Rockler or Bench Dog Router Table clean and dust free with this Router Table Dust Port! Quickly and easily connects to your table using T-knobs (not included). The 2-1/2'' OD (2-1/4'' ID) port connects to your shop vac or dust collection system.
If you're after the ultimate router table top-the pinnacle of size, stability, and durability-look no further than the Bench Dog Cast Iron Router Table. At 24'' x 32'' x 1-1/2'', the Bench Dog Cast Iron Router Table is the largest, flattest and most durable option on the market. And with this package, it's one of the best values too! Weighing in at nearly 100 lbs, the one-piece top provides more than five square feet of ultra-flat work surface, precision ground to within .008''. Its 12-point plate-leveling/locking system guarantees a flush working area and keeps the heavy-duty aluminum router plate (included) secure while cutting. Plus, you get Bench Dog's 32'' ProFence, a precision-milled aluminum fence with two MDF sub-fences, T-tracks on both sides, a 2-1/2'' dust port and an integrated bit guard. Table top built from one solid piece of 1-1/2'' thick cast iron to absorb vibration better than any table on the marketFeatures dual-track with standard miter track and universal T-track which accepts 1/4'' T-bolts, 5/16'' T-bolts and 1/4'' hex boltsHeavy-duty one-piece aluminum fence frame is fully machined on the front and bottom surfaces, ensuring the ProFence is flat, true and squareMDF sub-fences adjust without tools, perfect for zero-clearance setupProFence includes heavy-duty bit guard and dust port on the back of the fenceProFence also features EZ-Load Universal T-tracks that accept 1/4'' and 5/16'' T-bolts as well as 1/4'' hex bolts - perfect for hold-downs, stops and other accessories such as featherboardsRecommended for use with the Rockler Steel Router Cabinet with Dust Bucket (41427, sold separately) or the Rockler Router Table Steel Stand (48426, sold separately). 52790 - Bench Dog Cast Iron Router Table, Pro Fence and Non-Drilled Plate with 3-1/4'' Opening (for Standard Inserts) 59685 - Bench Dog Cast Iron Router Table, Pro Fence and Non-Drilled Plate with 3-11/16'' Opening (for Large Inserts) To choose a pre-drilled plate, find your router below. If it's not listed, choose from two non-drilled plates-one with a 4'' insert ring, and the other a 4-3/8'' insert ring-and drill the plate to fit your router. Plate A routers: Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch MRC23 Series, 1617-1618; Ridgid 2930 Combo Kit; Hitachi M12VC (fixed and kit); Porter-Cable 690, 890, 7529, 97529 and 8529. Note: Current models of the Porter-Cable 892 require at least two screws to be 1/2" long versus 5/8".Plate B routers: DeWalt DW621 and DW621K; Craftsman Standard; Freud FT 1700E and 1702VCEKPlate C routers: Porter-Cable 7518, 7519, 7538 and 7539; Milwaukee 5625-20; Triton TRA001 and MOF001Plate D routers: Bosch 1619-1619EV; Freud FT2000; DeWalt 625
Stronger than dowels and biscuits, the tongue and groove joints you'll cut with this bit are perfect for edge-joining panels, table tops, or any other glue-up project. The interlocking design increases the available surface area for the glue, resulting in an incredibly strong joint. Since the pieces are self-aligning, your glue-ups will be faster and less stressful. 1-1/2" diameter, 1-3/16" cutter length, 1/2" shank, 1-1/2" shank length.
The AutoRoute series of CNC machines from Axiom offers advanced features usually found only on machines in industrial environments, but at consumer-friendly prices. The AutoRoute 4 Basic is the least expensive model, with XYZ travel of 24'' x 24'' x 6'', and a universal router mount that accepts a wide variety of commonly available woodworking routers (see below). A computer need not be attached to the CNC to operate it. Instead, simply transfer your file to the included handheld controller via USB. The RichAuto A11 controller is an easy-to-use, robust controller with nearly a decade of proven results in demanding applications. It is more stable than a PC, and no updates are required. Every Axiom AutoRoute CNC machine also offers precision ball screws, prismatic guides, robust, rigid steel frames, and interlocking aluminum tables. In addition, the integrated MDF spoil boards promise exacting precision, as they can be milled flat for true perpendicularity with the spindle. Whether you're looking to upgrade your entry-level CNC, or you just want to start out with a machine that promises top-quality results and ease of use, you're sure to be pleased with the AutoRoute series from Axiom. Universal 3-1/2'' router mount accepts a variety of motors (not included, see complete compatibility list below)Features precision ball screws, plus prismatic guides on all axesWelded structural steel frame for less vibration and greater accuracyInterlocking aluminum table accepts T-track accessoriesCast gantry supports for maximum rigidityIntegrated MDF spoil board can be machined flat for precise perpendicularity with spindle200 IPM maximum feed rate (3.3'' per second)6.5'' gantry clearance and 6'' of Z-axis travel for compatibility with tall workpiecesAutomatic Tool Touch-Off Puck makes it easy to zero out the Z-axisIncludes Axiom industrial CNC controller with handheld control unit Software and Stand are not included with the machines. Two software packages are available: VCarve Pro 8.0 (Item #58150) Photo VCarve (Item #54822 Fully compatible with the following routers: Bosch 1617 and 1618Porter Cable 890 SeriesPorter Cable 690 SeriesDeWalt 610, 616, 618