Jet Shaper with 1/2'' & 3/4'' Spindles

If you're looking for a space-saving shaper for your shop, the new JET JWS-25CS Shaper is what you need. This compact powerhouse features a 8000 and 10000 RPM reversing 3HP motor. The large 25" by 25" precision ground cast iron table provides a large, durable, work area. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independent left and right fences feature micro-adjustment, and a built in 4" dust port. If you feel you just don't have the space, the nominal 23" x 25" footprint of this workhorse is sure to change your mind. Put the new JET JWS-25CS Shaper in your shop today, you'll know why JET products are "Built Better to Build Better."Starting Pins for irregular shapingForward/reverse switch for left and right hand operation Two-speed step pulley drive lets you select the best speed and torque for different cutter diameters Independent left and right fences feature micro-adjustment and have zero-clearance capability Extra-large handwheel is conveniently located for fast, easy and accurate spindle height adjustments Positive detent spindle lock allows safer, easy cutter set-up 4" dust port connects to your collection system to keep your workplace dust and debris-free Fully enclosed, heavy-duty steel stand has a removable cover for easy motor access Unique ratcheting style levers allow you to micro-adjust your fence assembly to your exact needs Powerful 3HP motor and heavy-duty magnetic controls deliver smooth, consistent power on even the heaviest jobs 25" x 18" solid cast iron table comes with an additional 25" x 7" extension wings to handle extra large work pieces Four adjustable work hold-downs to secure your work while shaping 1/2" and 3/4" interchangeable spindles and router bit collets for use with shaper cutter and router bitsProduct Specifications:Jet Part Number: 708322Model Number: JWS-25CSBrand: JetHeight: 40"Width: 29"Length: 23"Net Weight: 338 lbs.Spindle Speed: 8,000 and 10,000 RPMSpindle Diameter: 1/2" and 3/4"Spindle Travel: 3Table Size: 25" x 25"Table Height from Floor: 34"Table T-Slot: 3/4" x 3/8"Table Opening Diameter: 6-7/8"Table Insert Opening Diameter: 1-5/8", 3", and 3-1/2"Fence Size (L x H): 9-1/2" x 2-3/4"Dust Port Outside Diameter: 4"Motor Power: 3 HPMotor Voltage: 230 VPrewired Voltage: 230 VMotor Current: 16 AMotor Phase: 1 PhStandard Equipment:1/2" and 3/4" interchangeable spindlesWorkpiece hold-downsT-slot mitre gaugeMicro-adjustable fenceRigid, one-piece closed standCutter guard4" dust port7" x 25" cast iron extension wing

$2,024.00
Buy
 

Related Products

Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4" Dia x 7/16" H x 1/2" Shank

Rockler Classical Miniature Roman Ogee Plunge Router Bit - 3/4" Dia x 7/16" H x 1/2" Shank
$26.99

Based on a miniature Roman ogee design, this profile can be used in successive cuts, then ripped down for astragals, in series for decorative fluting patterns, or in single cuts for a flat bottom trench with profiled sides. 3/4" diameter with a sturdy, vibration-free 1/2" shank.

Rockler Wedge Tongue and Groove Router Bit - 1-1/2" Dia x 1-3/16" H x 1/2" Shank

Rockler Wedge Tongue and Groove Router Bit - 1-1/2" Dia x 1-3/16" H x 1/2" Shank
$49.99

Stronger than dowels and biscuits, the tongue and groove joints you'll cut with this bit are perfect for edge-joining panels, table tops, or any other glue-up project. The interlocking design increases the available surface area for the glue, resulting in an incredibly strong joint. Since the pieces are self-aligning, your glue-ups will be faster and less stressful. 1-1/2" diameter, 1-3/16" cutter length, 1/2" shank, 1-1/2" shank length.

Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank

Rockler Flush Trim V-Groove Router Bit - 1/2" Dia x 1" H x 1/2" Shank
$22.99

Sometimes it's better to emphasize a seam than to try to hide it. This bit does just that, applying a neat decorative V-groove along the line of the seam. Since you no longer have to sand the joint perfectly flush as you would with a typical flush trim bit, you also cut down on a lot of sanding. Just a pass or two with a palm sander is enough to remove any mill marks. Ideal for trimming cabinet face frames flush with the cabinet sides.