Save on all the must-have accessories for your Leigh FMT Mortise and Tenon Jig with this value-priced bundle! It includes a boxed-set of all the standard bits for the FMT-eight solid carbide bits in all, ranging from 1/16" to 1/2" in diameter-as well as sixteen specialty guides for routing a huge variety of perfect mortise and tenon joints.This kit includes three sets of FMT guides, each with its own unique capability.The 1/4" guide set contains eight guides and can machine mortises and tenons 1/4" thick, ranging from 1/4" to 2-3/8" wide.The 3/8" guide set includes 4 guides and can machine mortises and tenons 3/8" thick, ranging from 1" to 2-1/2" wide.The 1/2" guide set also includes 4 guides and can machine mortises and tenons 1/2" thick, ranging from 1" to 2-1/2" wide.The three sets also include convenient storage stands for simple, upright organization.
If you're building cope-and-stick doors and drawer fronts, our new Rail Coping Sled will be an indispensable helpmate. With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the fence, your rails will travel unwaveringly past the cutter for the cleanest, squarest cuts you can imagine. Particularly with drawer fronts, which sometimes use very narrow rails, the sled prevents parts from dipping in too deep and keeps your hands safely out of harm's way. A sacrificial block can be attached to the fence to prevent endgrain blowout, while an abrasive strip prevents the workpiece from wandering. Unlike many jigs that use the miter slot, our sled uses only the fence as a reference, so there is no need to waste time aligning the miter slot parallel with the fence. In addition, the coping sled has been redesigned so that the reference edge is a separate clear guide rail elevated 2'' above the table, meaning there is no risk of cutting into the sled. New, taller round handles allow a firm, comfortable grip from any angle of approachSmooth-sliding 3/8'' thick phenolic base stays rigid and flat when toggle clamp pressure is appliedToggle clamp features easy, tool-free adjustments and one-handed operationClear, elevated guide runs against fence, offering a large, smooth-running reference edge without having to cut into the sledClear guide runs 2'' above the table, so it works with most router table fences on the market (all Rockler and Bench Dog fences)Sacrificial block is easily replaceable to accommodate different profilesMaximum workpiece dimension is 5'' wide x 1-1/4'' thick
Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.
This versatile dish cutter boasts two carbide wings that cut a straight edge with a rounded corner and flat bottom. Ideal for cutting hollows and recesses into shallow bowls, plates, serving trays, jewelry box trays, coasters, coin holders, spoons and lettered signs. As an added benefit, the rounded corner is easy to clean, and won't trap dust like a square corner would. Sturdy 1/2" shank.