Create the look of hand-cut dovetails on stock up to 24" wide with your router and the Leigh D4R Pro Dovetail Jig '' plus get great dust collection and 12 additional router bits with the AC D24 Accessory Kit! The D4R features adjustable guide fingers, freeing you from the need to dimension your workpiece to suit the jig and providing infinite options for pin and tail width and spacing. Whatever the width of your stock, you can get a half-pin on the top and the bottom and custom spacing in between, meaning that you're never limited to repetitive, obviously machine-made joints. The D4R can handle boards up to 24" wide and 1-1/4" thick and comes with three cutters, cam-action speed clamps, crosscut bar, angled side stop, screwdriver, all mounting hardware, 160-page user guide and instructional DVD. Router with a 1/2" collet required. The accessory kit includes the (VRS) vacuum and router support, for full-width router support and dust-free routing, as well as a 12 piece Leigh bit set. What's Included:Leigh D4R Dovetail Jig 1/2" x 8° and 1/2" x 14° dovetail cutters (8mm shanks) 5/16" x 1" straight cutter (8mm shank) 1/2" to 8mm collet reducer 7/16" O.D. guide bushing 160-page manual Instructional DVD Vacuum and router support (VRS) 1/4", 5/16", 3/8", 7/16", 11/16", 13/16" x 8 degree dovetail bits 7/16" x 1-1/4" CL straight, 1/2" x 1-1/4" CL straight bits 1/2" x 10 degree, 12 degree, and 18 degree dovetail bits 1/2" and 8mm shank bits, 1/2" to 8mm collet reducer
Freud 99-569 Quadra-Cut Cove Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank
Freud's exclusive Quadra-Cut 4-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Use this panel raiser to mill panels from 3/4" stock that are flush with the door frame for a professional, architecturally correct appearance. The cove profile raised panel bit also includes a back cutter to cut the relief so the panel fits into the groove. This means there's no need to plane panels down to 5/8", saving wear and tear on your machinery. Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4" for maximum versatility and compatibility. Produces a full 1-1/2" wide reveal for traditional raised panel doors.Cuts all composition materials, plywoods, hardwoods and softwoods.Use on table-mounted portable routers.
The interchangeable insert for standard guide bushings features a 1-1/4" opening. The 4" OD allows this insert to fit into a standard plate with a 3-1/4" opening.Fits the following Rockler Router Table Plates: Rockler Router Plate AMakita 1100Milwaukee 5615-5624DeWalt 616-618Bosch 1617- 161Rigid 2930 Combo KitHitachi M12VC (Fixed & Kit)Bosch MRC23EVSKPorter Cable 690Porter Cable 890Porter Cable 7529Porter Cable 97529Porter Cable 8529Rockler Router Plate BDeWalt DW621DeWalt DW621KCraftsman StandardFreud FT 1700EFreud 1702 VCEK
This straight panel raiser cuts a classic design most famously employed in Shaker furniture. It is primarily designed to raise Shaker panels, but can also be used to bevel the underside of table tops. It features Freud's exclusive Quadra-Cut 4-cutter design, which provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.Application: Ideal for creating raised panels for doors and paneling, as well as for beveling decorative tops, plaques and moldingRevolutionary Quadra-Cutdesign combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish.Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers only.