Leigh Pin Plates for R9 Plus Joinery System, 2 Pack

Extend the length of your joinery by adding a pair of Leigh R9 Pin Plates to your Leigh R9 Plus Joinery System! Each additional pin plate position extends the beam by 10" and allows an additional 9 inches of joint pattern.Technical Details:Each additional pin plate position extends the beam by 10"Allows an additional 9 inches of joint pattern

$11.99
Buy
 

Related Products

Maple Black Mahogany Southwest Inlay Banding, 3/16'' W

Maple Black Mahogany Southwest Inlay Banding, 3/16'' W
$15.99

Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.

Freud 99-863 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank

Freud 99-863 Double Side Door Cutters Set Router Bit - 1-11/16" Dia x 9/16" H x 1/2" Shank
$101.97

Making double-sided doors has never been easier! This optional cutter for double-sided doors matches the bead profile of Freud's 99-763 Stile and Rail Bit Set (32427, sold separately). The result affords you even more creative freedom by letting you build custom frame and panel doors with decorative edges on both sides-perfect for doors that will be visible from both sides! Two add-on cutters are included, one for the rail cutter, and one for the stile cutter. Both allow you to make double profile doors with variable thicknesses and long tenons. The cutters are machined to precisely match the Freud 99-763 rail and stile bit set.Perma-Shield coating reduces heat and pitch build up along with rustTiCo Hi-Density Carbide maximizes bit life and material finish

Freud 99-760 Quarter- Round Premier Adjustable Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank

Freud 99-760 Quarter- Round Premier Adjustable Rail and Stile Router Bit Set - 1-11/16" Dia x 1-1/4" H x 1/2" Shank
$127.47

Produce perfect-fitting beaded stile and rail doors from 5/8" to 1-1/4" thick! Adjustable shims enable a tight fit when using plywood as thin as 7/32" (5.5mm), and also allow use with thick panels. To produce the front of a longer tenon profile for blind tenons, through tenons or bridle joints, remove the top portion of the cutter (including bearing and spindle). High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch buildup. 1/2" shanks.Create extended tenons for extra door joint strength (patented solution) - Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile.Choose from a variety of material thicknesses (5/8" to 1-1/4").Adjustable shims adjust panel groove down to 7/32" (5.5mm) and up to 3/8" (9.5mm) thick, ideal for plywood panels.Unique cutter geometry to eliminate tear-out.TiCo Hi-Density Carbide to maximize bit life and material finish.Perma-SHIELD coating reduces heat & pitch build-up from rust.