Leigh R9 Plus Joinery System

Create through dovetails and finger joints on boards of any width with the Leigh R9 Plus Joinery System! The R9 Plus helps you do it quickly and with precision. And with dependable Leigh quality, you know you'll get pins and tails that fit perfectly every time! Features a template designed to be used with a stand alone router (bench mode) or on your router table.Note: Leigh R9 Plus Joinery System mounts to a shop made beam (not included) in order for the user to operate properly.Technical Details:Cut through dovetails on unlimited board widths on board thickness up to 13/16"Three dovetail pin widths - 3/8", 7/16", and 1/2"Two dovetail joint pitches - 1-1/2" and 3/4"Cut Box Joints on any board thickness up to 1" in three different sizes (3/16", 3/8", and 3/4")No jig adjustmentsJoint fit is controlled by patented eBushWorks on your router table or with a standalone routerAdjustable width clampingReplaceable backer board eliminates tear out

$169.00
Buy
 

Related Products

Rockler Roundover Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank

Rockler Roundover Edging/Dimensioning CNC Router Bit - 1" Dia x 1" H x 3/8'' R x 1/2" Shank
$47.99

Create signs and table tops with decorative edging in far less time with this unique router bit mounted in your CNC machine. The innovative dual-purpose bit simultaneously cuts your parts to size and applies an edge profile, meaning there's no need to change bits, or to remove the parts to machine them again on a traditional router table. No bearing guide means longer lifespan, and no marks on the edge of your work piece from gummed up bearings. Note: For best results and longer tool life we recommend slowing the feed rate and making several passes.

Rockler Router Plate Insert With 2-1/2" Opening For Large Plates

Rockler Router Plate Insert With 2-1/2" Opening For Large Plates
$8.99

The interchangeable insert for standard bits features a 2-1/2'' opening. The 4-3/8'' OD allows this insert to fit into a large plate with a 3-11/16'' opening. Fits the Following Router Lifts: Rockler Router Lift FX (23194) Bench Dog 40-150 ProLift Router Adjustment System (28827) Fits The Following Rockler Router Table Plates:Rockler Router Plate CPorter Cable 7518Porter Cable 7519Porter Cable 7538Porter Cable 7539Milwaukee 5625-20Triton TRA001Triton MOF001Rockler Router Plate DBosch 1619-1619EVFreud FT2000DeWalt 625

Freud 99-569 Quadra-Cut Cove Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank

Freud 99-569 Quadra-Cut Cove Raised Panel with Back Cutters Router Bit - 3-1/2" Dia x 1" H x 1/2" Shank
$119.97

Freud's exclusive Quadra-Cut 4-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Use this panel raiser to mill panels from 3/4" stock that are flush with the door frame for a professional, architecturally correct appearance. The cove profile raised panel bit also includes a back cutter to cut the relief so the panel fits into the groove. This means there's no need to plane panels down to 5/8", saving wear and tear on your machinery. Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4" for maximum versatility and compatibility. Produces a full 1-1/2" wide reveal for traditional raised panel doors.Cuts all composition materials, plywoods, hardwoods and softwoods.Use on table-mounted portable routers.