This new PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30" x 40" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.Integrated caster system built into the cast iron base for instant shop mobilitySpindle height digital readout for making fine incremental adjustments on multiple passesHeavy duty 30" x 40" precision ground tabletop for smooth stock feedingConvenient quick lock belt tensioning for easy speed adjustmentIndustrial fence system with fine adjust dials for more precise positioning5HP totally enclosed motor offers plenty of powerTwo spindle speeds (reversible) for a variety of workSuperior clear cutter guard promotes safety, allows observation of the entire cutTable predrilled and tapped for feeder mounting in two locationsFence has dual featherboards for work holdingDual 4" ports for attachment to dust collection systemStandard Equipment:3/4" and 1-1/4" interchangeable spindle colletsSpindle height digital readoutFeatherboard hold downsDeluxe miter gaugeIntegrated caster system
This advanced model of the GRR-Ripper boasts all of the same innovative features of the GR-100 but comes with three additional accessories (see below)-including the Gravity Heel Kit-to improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200) is designed to feed your workpiece more safely and more accurately than with conventional push blocks, resulting in intact fingers, less burning and less waste. With its 3-Directional control, it gives you downward, forward, and lateral pressure on the stock for maximum control. Since it acts as a movable blade guard that travels with your hand, it provides an additional safety buffer between the blade and your hands. Whether you are making razor-thin veneer strips, building miniatures, or creating exquisite furniture you will save time, materials, and fingers with the GRR-Ripper. This package includes these additional accessories: The Gravity Heel Kitprovides a positive hook that grips the end of your board, ideal when you need additional support for feeding hard or heavy stock through your saw. The heel drops down automatically, aided only by gravity, and retracts when placed in the middle of the board. It can also be adjusted laterally to provide zero-clearance backup support to prevent grain blowout. Five sacrificial heels are included, plus two heel spacers and mounting hardware. The Adjustable Spaceradds increased gripping surface for tackling larger stock. It also adds one inch of cutting width to the GRR-Ripper and acts as a secondary balance support for small stock and straight-line ripping. Great add-on for working on the router table, and eliminating snipe. The Stabilizing Plateadds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Perfect for trickier cuts like resawing, bevel edging, pattern routing, and much more. It also acts as a secondary fence that travels with the GRR-Ripper along the left side of the stock. It holds the off-cut piece in its original position through the entire cutting operation. Some users call it a "Feather Board Plate," but unlike a featherboard, it exerts no sideways pressure. Instead it simply holds the drop-off piece in position as it travels past the blade, preventing binding. Click the video to see a demo today.
This versatile dish cutter boasts two carbide wings that cut a straight edge with a rounded corner and flat bottom. Ideal for cutting hollows and recesses into shallow bowls, plates, serving trays, jewelry box trays, coasters, coin holders, spoons and lettered signs. As an added benefit, the rounded corner is easy to clean, and won't trap dust like a square corner would. 1/4" shank.
Now you can use your FMT to make precise louver doors with standard 1/4" x 1-1/4" louvers at a 45° angle. Matching tenons can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortise. Sold in left and right matching pairs. Note: New FMT guides not exactly as shown.