This new PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30" x 40" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.Integrated caster system built into the cast iron base for instant shop mobilitySpindle height digital readout for making fine incremental adjustments on multiple passesHeavy duty 30" x 40" precision ground tabletop for smooth stock feedingConvenient quick lock belt tensioning for easy speed adjustmentIndustrial fence system with fine adjust dials for more precise positioning5HP totally enclosed motor offers plenty of powerTwo spindle speeds (reversible) for a variety of workSuperior clear cutter guard promotes safety, allows observation of the entire cutTable predrilled and tapped for feeder mounting in two locationsFence has dual featherboards for work holdingDual 4" ports for attachment to dust collection systemStandard Equipment:3/4" and 1-1/4" interchangeable spindle colletsSpindle height digital readoutFeatherboard hold downsDeluxe miter gaugeIntegrated caster system
Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.
The interchangeable insert for standard bits features a 2-1/2'' opening. The 4-3/8'' OD allows this insert to fit into a large plate with a 3-11/16'' opening. Fits the Following Router Lifts: Rockler Router Lift FX (23194) Bench Dog 40-150 ProLift Router Adjustment System (28827) Fits The Following Rockler Router Table Plates:Rockler Router Plate CPorter Cable 7518Porter Cable 7519Porter Cable 7538Porter Cable 7539Milwaukee 5625-20Triton TRA001Triton MOF001Rockler Router Plate DBosch 1619-1619EVFreud FT2000DeWalt 625
Specially designed for signmaking applications, with a flatter bottom to prevent peaks in routed letters. Recommended for use with plunge router. 1/4" shank.The 3/8" Signmaking Carbide Router Bit is required for the 2-1/4" Rockler Interlock Signmaker's Templates - State Park Font Kit (48356, sold separately).The 5/8" Signmaking Carbide Router Bit is required for the 3-3/8" Rockler Interlock Signmaker's Templates - State Park Font Kit (43820, sold separately).