At 28" x 40", it's large enough to accommodate any CNC Shark, as well as most other consumer CNC routers. Your controller hangs conveniently below the table in a saddle-shaped bracket, and is easy to access for emergency shut-downs. With its sturdy steel stand as a foundation, you'll get rock-solid stability, and plenty of storage potential, and the included leveling feet ensure that your router bed stays flat for precise results.MDF Top:Table top measures 28" x 40". Top is made of 1-1/8" thick melamine-coated MDF with 3mm black edge banding.Steel Stand (included):Steel base measures 24"W x 36"L x 32"H.All legs and stretchers are pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts. Legs are heavy-duty 1/8" steel to support any shop application. Includes 4" x 1/2" heavy-duty adjustable levelers for various height settings.Includes four 32" legs and all mounting hardware (carriage bolts and nuts).Top stretchers can be mounted flush with top or 4" down to add drawer or woodworking vice. All parts coated with durable black sand paint. Optional casters can be mounted in place of the adjustable feet (47034, sold separately).CNC Controller Bracket:Compatible with controllers for CNC Shark routers.Inside width of CNC Controller Bracket is 11-3/4".Inside height is 5-1/2", which leaves space for the controller to hang below the top stretcher.Sturdy steel construction.
Set contains Premier Adjustable Ogee Rail and Stile Bits to mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Ogee Raised Panel Bit with back cutter.
Application: Matching moldings in historic homes.Forms a single bead with a square shoulder.Commonly used by remodelers to match base moldings in historic homes.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
With two included bearings-one flush for a standard round over, and one slightly smaller for a beaded edge-these combination bits make versatile workhorses that will see plenty of use in your shop. Among our most popular router bit choices, they're perfect for making edges softer, both to the touch as well as to the eye. For a bit more definition, just switch the bearing to the beading mode. Shear angle provides the smoothest cut available.Includes smaller 3/8" bearing and wrench for beading applications at no additional charge.Items with * in the description are larger bits that should be used in router tables at reduced RPM.Two flutes.1/2" bearing pre-installed.1/2" shank for minimal vibration.