Give your furniture and cabinets a classic, architectural look with this unique molding bit. Perfect for chair rails, crown molding, door casings, trim, pilasters, window casing/sills, baseboards and picture frames, you can use the full profile, or just a portion of it to achieve the look you want. Features two flutes and a 3/8" ball bearing guide.
This advanced model of the GRR-Ripper boasts all of the same innovative features of the GR-100 but comes with two additional accessories (see below) that improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200) is designed to feed your workpiece more safely and more accurately than with conventional push blocks, resulting in intact fingers, less burning and less waste. With its 3-Directional control, it gives you downward, forward, and lateral pressure on the stock for maximum control. Since it acts as a movable blade guard that travels with your hand, it provides an additional safety buffer between the blade and your hands. Whether you are making razor-thin veneer strips, building miniatures, or creating exquisite furniture you will save time, materials, and fingers with the GRR-Ripper.The GR-200 includes these additional accessories:The Adjustable Spacer - This accessory adds increased gripping surface for tackling larger stock. It also adds one inch of cutting width to the GRR-Ripper and acts as a secondary balance support for small stock and straight-line ripping. Great add-on for working on the router table, and eliminating snipe.The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Perfect for trickier cuts like resawing, bevel edging, pattern routing, and much more.The Stabilizing Plate also acts as a secondary fence that travels with the GRR-Ripper along the left side of the stock. It holds the off-cut piece in its original position through the entire cutting operation. Some users call it a "Feather Board Plate," but unlike a featherboard, it exerts no sideways pressure. Instead it simply holds the drop-off piece in position as it travels past the blade, preventing binding.Watch a video demo today by clicking on the "Videos" tab above.
The AutoRoute series of CNC machines from Axiom offers advanced features usually found only on machines in industrial environments, but at consumer-friendly prices. The AutoRoute 6 Pro is the mid-sized Pro model. With XYZ travel of 24'' x 36'' x 6'', and a powerful 3HP electro-spindle, it is perfect for a wide variety of parts, including guitar bodies. A computer need not be attached to the CNC to operate it. Instead, simply transfer your file to the included handheld controller via USB. The RichAuto A11 controller is an easy-to-use, robust controller with nearly a decade of proven results in demanding applications. It is more stable than a PC, and no updates are required. Every Axiom AutoRoute CNC machine also offers precision ball screws, prismatic guides, robust, rigid steel frames, and interlocking aluminum tables. In addition, the integrated MDF spoil boards promise exacting precision, as they can be milled flat for true perpendicularity with the spindle. Whether you're looking to upgrade your entry-level CNC, or you just want to start out with a machine that promises top-quality results and ease of use, you're sure to be pleased with the AutoRoute series from Axiom. Includes powerful 3HP (2.2 KW) Electro Spindle with 1/4'' and 1/2'' ER20 colletsIntegrated Liquid Cooling System for maximum life even under the most demanding conditions0-24,000 RPM variable speed control lets you adapt the router speed to the applicationFeatures precision ball screws, plus prismatic guides on all axesWelded structural steel frame for less vibration and greater accuracyInterlocking aluminum table accepts T-track accessoriesCast gantry supports for maximum rigidityIntegrated MDF spoil board can be machined flat for precise perpendicularity with spindle200 IPM maximum feed rate (3.3'' per second)6.5'' gantry clearance and 6'' of Z-axis travel for compatibility with tall workpiecesAutomatic Tool Touch-Off Puck makes it easy to zero out the Z-axisIncludes Axiom industrial CNC controller with handheld control unit Software and Stand are not included with the machines. Two software packages are available: VCarve Pro 8.0 (Item #58150) Photo VCarve (Item #54822
Although its attractive price might suggest an entry level machine, the CNC Piranha is every bit as capable as its CNC Shark cousins and it even includes a convenient touch-screen interface! Its compact 12'' x 18'' table makes it perfect for smaller-scale projects like carvings, plaques, ornamental boxes and precision parts machined from wood, soft metals, or plastics, all at a fraction of the price of a full-sized CNC. With its 3D carving capability, including a 3D models library, you can carve expensive corbels, cut intricate inlays and engravings. The CNC Piranha has such incredible accuracy that you can engrave custom circuit boards with it. In addition, the entire machine can easily fit on one end of your bench. Design your project with the included VCarve Desktop 8.0 Design software on a PC computer with USB 2.0 port (computer not included). Then save the program directly to a USB flash drive, plug it into the Pendant, select your file, and hit the run button. By using the flash drive, your computer won't be subjected to a dusty shop environment. Put the power of the Piranha to work for you today! Made in USA.Note:Requires a PC computer with USB 2.0 port (not included)Requires a Bosch, Dewalt, Porter Cable, or similar style palm router (sold separately). Included router clamp fits the Bosch router; Dewalt and Porter Cable routers require a separate router clamp (58703, sold separately)Currently not compatible with the Touch Probe (upgrade coming soon)