This package includes our acclaimed Router Lift FX, which lets you adjust the bit height quickly and comfortably from the top of your table. No more stooping and squinting in the dark, just turn the included hex wrench to make adjustments. Plus, you'll enjoy sag-free support with the 3/8'' thick aluminum plate. The table is 1-1/8'' thick MDF sandwiched with white HPL for good visibility and durability. A combination miter track and universal accessory T-track runs the length of the table for mounting featherboards, stops and jigs. The included fence also has universal T-tracks, plus adjustable white melamine MDF faces and an integrated bit guard. Includes our acclaimed Rockler Router Lift FX for above-table bit height adjustments and bit changesThe Router Lift FX accepts the following routers: Porter-Cable 690/890 series, Bosch 1617-16-18, DeWalt 610, 616, 618Router Lift FX includes insert ring with 1-1/2'' opening3/8'' thick aluminum router plate for flatness and rigidity8-point plate leveling system with two locking points24'' x 32'' table for over five square feet of surface areaDual track in table combines standard miter track with universal accessory track, which accepts 5/16'' T-bolts or 1/4'' hex bolts for custom made jigs and featherboardsExtruded aluminum fence backer provides a stiff, straight reference surface when routing3/4'' T-profile miter slot allows you to use precision aftermarket miter gaugesFence backer features top-mounted universal T-track that accepts 5/16'' T-bolts, 1/4'' T-bolts, and 1/4'' hex boltsOpening in fence is easily adjustable to accommodate large router bitsErgonomic T-knobs for easy fence adjustmentIncludes bit safety guard for safe routingTo add a dust port and featherboards to this table see our 4-Piece Router Table Accessory Kit (56764, sold separately)
If you're building cope-and-stick doors and drawer fronts, our new Rail Coping Sled will be an indispensable helpmate. With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the fence, your rails will travel unwaveringly past the cutter for the cleanest, squarest cuts you can imagine. Particularly with drawer fronts, which sometimes use very narrow rails, the sled prevents parts from dipping in too deep and keeps your hands safely out of harm's way. A sacrificial block can be attached to the fence to prevent endgrain blowout, while an abrasive strip prevents the workpiece from wandering. Unlike many jigs that use the miter slot, our sled uses only the fence as a reference, so there is no need to waste time aligning the miter slot parallel with the fence. In addition, the coping sled has been redesigned so that the reference edge is a separate clear guide rail elevated 2'' above the table, meaning there is no risk of cutting into the sled. New, taller round handles allow a firm, comfortable grip from any angle of approachSmooth-sliding 3/8'' thick phenolic base stays rigid and flat when toggle clamp pressure is appliedToggle clamp features easy, tool-free adjustments and one-handed operationClear, elevated guide runs against fence, offering a large, smooth-running reference edge without having to cut into the sledClear guide runs 2'' above the table, so it works with most router table fences on the market (all Rockler and Bench Dog fences)Sacrificial block is easily replaceable to accommodate different profilesMaximum workpiece dimension is 5'' wide x 1-1/4'' thick
Set your router bit to the precise height every time for accurate lock miter joints! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit. Jig works for 3/4" stock on one side and 5/8" stock on the other. Made of durable HDPE and measures 2" x 3-7/8" x 3/4".
Use this high-performance 2-3/4" diameter cutter for creating raised panels for doors and wainscoting, as well as decorative tops, plaques and molding. Freud's exclusive Quadra-Cut four-cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Quadra-Cutdesign combines two small wings that cut downward to shear the top edge for a splinter-free surface and two large wings that shear upward for the most efficient chip ejection.Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock.Cuts all composite materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.