Rockler Piloted Flush Trim Router Bits - 1/2" Shank

The ball-bearing pilots on these bits make it virtually impossible to cut too deep, eliminating expensive and time-consuming rework. The bearing guide is on the bottom of the shaft, below the blades, which lets you trim face frames flush with cabinet sides, shelf caps flush with shelves, or veneers and laminates flush with the substrate. The cutter can also be used for template work where the template is below the worked material or, alternatively, with a router mounted in a router table where the template is above the worked material. In both cases it is suitable for straight and particularly shaped patterns.

$17.99
Buy
 

Related Products

Rockler Undersized Straight Router Bits - 1/4" Shank

Rockler Undersized Straight Router Bits - 1/4" Shank
$13.99

These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which requires a flat, finished bottom. The two-flute cutters give a smooth finish with a medium feed rate. Two flutes, 1/4" shank.

Bench Dog Cast Iron Router Table, Pro Fence, Steel Stand and ProLift Router Lift

Bench Dog Cast Iron Router Table, Pro Fence, Steel Stand and ProLift Router Lift
$949.99

Meet the ultimate router table! At 24'' x 32'' x 1-1/2'', the cast iron top is the largest, flattest, and most durable option on the market. Weighing in at nearly 100 pounds, it's built from one solid piece of cast iron to absorb vibration better than any table on the market. It provides more than five square feet of ultra-flat, precision-ground work surface. Plus, it includes a Rockler Steel Stand with pre-drilled holes so you can easily add your own custom cabinet and a ProLift Router Lift (see below for more details). Plus, you get the 32'' ProFence, a precision-milled aluminum fence with two MDF sub-fences, jointer bars, front and rear T-tracks, a 2-1/2'' dust port and an integrated bit guard. Dual T-tracks in the table: a standard miter slot and a Universal T-track for accessoriesCast iron table top provides over five square feet of surface areaUniversal T-tracks accept 1/4'' and 5/16'' T-bolts as well as 1/4'' hex bolts perfect for hold-downs, stops, featherboards and more32'' Pro Fence is precision machined for flatness and squareness and includes front- and rear-mounted universal accessory T-tracksSturdy steel stand has pre-drilled holes so you can add your own cabinet or dust shroud Bench Dog ProLift Router Lift: You'll love this router lift's range, speed and accuracy! With 0.001" adjustment resolution, it allows for absolute precision with the naked eye. Enjoy unmatched linear motion speed and convenient features. After removing the insert plate, raise the collet above the table for easy bit changes of any size. And with heavy-duty bronze bushings, the ProLift is designed to withstand demanding daily use. Integral fins keep your router running cool, while the direct-drive mechanism eliminates the complication and slop of belts, chains and gears. Plate size: 8-1/4" x 11-3/4"Plastic insert ring with 1-1/2" openingCompatible with large opening insertsVertical travel: 5-1/2" (varies slightly w/ installation)Height adjuster: 0-1/8 scale, 0.0025" incrementsIncluded tools: speed wrench/socket/fine adjusterWeight w/o router: 22 lbs Use ProLift only with fixed-base routers. It fits 4.2" diameter motor housings, such as those of the Porter-Cable 7518 and 7519. Adapters (sold separately) are required as noted below for routers with smaller motors. 28842 ProLift Adapter 40-002 Porter-Cable 690 SeriesPorter-Cable 890 SeriesBosch 1617Bosch 1618DeWalt 610DeWalt 616DeWalt 618 26603 ProLift Adapter 40-003 Makita RF1100 and RF110

Rockler Rabbeting Router Bit Set - 1/2" Shank

Rockler Rabbeting Router Bit Set - 1/2" Shank
$49.99

With a full 1" of carbide length and four interchangeable bearings, this rabbeting bit is capable of cutting in horizontally at 5/16", 3/8", 7/16" and 1/2" increments, and up to 1" vertically, infinitely adjustable with your router. The carbide is ground to a fine edge to provide the longest possible cutting life, and smooth, burn-free rabbets. It features a rugged 1/2" shank that cuts vibration for the smoothest possible cut. A hex wrench is included for swapping the bearings.