Rockler Porter-Cable Dovetail Jig Replacement Router Bit - 13/32" Dia x 1" H x 1/2" Shank

This is a replacement straight router bit for the 4212 Porter-Cable 12" Dovetail Jig (29550, sold separately). Use it for box joints. Two flutes for optimal chip removal, with an overall Length of 2-1/2". Diameter is 13/32" and carbide height is 1".

$17.99
Buy
 

Related Products

Complete Basic Router Table Kit With Accessory Kit

Complete Basic Router Table Kit With Accessory Kit
$289.98

Whether you're in the market for your first router table, or a second basic table to be left set up for common operations, this package makes a fantastic value. It includes everything you need except the router, offering many of the benefits of much more expensive tables. It's a full-size router table with nearly five square feet of low-friction melamine surface area, and includes a rigid, precisely extruded aluminum fence. The MDF sub-fences can be easily repositioned around the bit and a safety bit guard is included to protect your fingers. The 3/8'' thick phenolic router plate is pre-drilled to fit Group A routers (see below for details). Features: Includes router table top, router mounting plate, fence, bit guard, starting pin and steel standPowder-coated black steel stand is sturdy, yet lightweight (despite its appearance, the stand does not fold up)Overall table height is 36''Top is full-size-31-5/8'' x 23-3/4'' x 1'' thick MDF with a melamine veneerRouter plate is phenolic, 8-1/4'' x 11-3/4'' x 3/8'' thick with four leveling screws and an insert ringInsert ring is 4'' O.D. and 1-1/2'' I.D.Standard 3/4'' x 3/8'' aluminum miter trackFence is 32'' long with a solid extruded aluminum backerFence and sub-fences offer tool-free adjustments Included plate is pre-drilled to fit Group A routers: Makita 1100Milwaukee 5615-5624DeWalt 616-618Bosch 1617-1618Ridgid 2930 Combo KitHitachi M12VC (fixed and kit)Porter-Cable 690, 890, 7529, 97529 and 8529 Note: Current models of the Porter-Cable 892 require at least two screws to be 1/2'' long versus 5/8''.

Ready2Rout Electronic Fence Positioner with Free Touch Plate

Ready2Rout Electronic Fence Positioner with Free Touch Plate
$599.99

Ready2Rout Electronic Fence PositionerWith computer-controlled precision, repeatable fence settings stored in memory, a pre-installed suite of apps, and many more to come, this first-ever electronic router fence ushers the humble router table into the "smart" era. Woodworkers used to endlessly tapping and bumping their fences will appreciate the ease and simplicity of pressing only a few buttons to dial in a setting. Simply zero out the fence, and every adjustment afterwards is accomplished with the onboard touch-screen interface and a precision lead screw with anti-backlash. Three ''apps'' are included for box joints, dadoes, half-blind dovetails, plus step-and-repeat functions such as those for fluted columns and beadboard. The fence works without a computer attached, but a USB port on the back allows you to easily install additional apps and update software. Made in USA.More apps will be available in the future to further enhance the versatility of your Ready2Rout!Accurate to within 0.001-inch.Perfect repeatability for joinery such as dadoes, half-blind dovetails and box joints, andfor decorative elements such as flutes.A stroke of the touch screen commands the fence to move to its next position - perfect for step-and-repeat operations.To space and cut box joints, simply enter the diameter of your bit and the width of your workpiece and the system automatically positions the fence for the cuts.Touch screen can be used to indicate the router bit width, and to convert to metric decimals or fractions. For example, you can use a 1/4-inch bit to rout a 12mm dado without complicated calculations or measurements.Firmware updates are made via USB port on the rear of the fenceTight-tolerance lead screw precisely moves the fence in relation to the bit.Fence travels up to 9 ¾'' without repositioning the rail.Up to six fence positions can be saved in the system's memory so you can come back later and repeat the operations.Note: The Ready2Rout Fence does not control router bit height. The bit height is set in the conventional manner.Made in the USA1 year warrantyTouch PlateTo use the Touch Plate, plug one end into the controller, attach the magnet to the collet, and lower the router bit onto the touch plate. Constructed of durable metal and precision-machined for accuracy.

Rockler Router Plate Insert With 1-1/2" Opening For Standard Plates

Rockler Router Plate Insert With 1-1/2" Opening For Standard Plates
$8.99

The interchangeable insert for standard plates features a 1/2'' opening. The 4'' OD allows this insert to fit into a standard plate with a 3-1/4'' opening. Fits The Following Rockler Router Table Plates:Rockler Router Plate AMakita 1100Milwaukee 5615-5624DeWalt 616-618Bosch 1617- 161Rigid 2930 Combo KitHitachi M12VC (Fixed & Kit)Bosch MRC23EVSKPorter Cable 690Porter Cable 890Porter Cable 7529Porter Cable 97529Porter Cable 8529Rockler Router Plate BDeWalt DW621DeWalt DW621KCraftsman StandardFreud FT 1700EFreud 1702 VCEK