Dress up your mitered corner joints and add strength, too, with the Rockler Router Table Spline Jig! This clever jig locks into a standard router table miter slot and features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit. The adjustable fences act as stops to position your workpiece-one setting can cut all four slots for a frame, or eight slots for a box. Try different router bits to achieve different effects-straight bits, V-groove bits, dovetail bits and more! For larger boxes and chests see our Large Box Spline Jig (55153, sold separately), which is clamped to the outside corners of your box and used with a handheld router. Capable of accommodating a frame with a standard 11'' x 14'' opening, or a box measuring up to 12'' x 12'' x 12''Smooth-sliding tracks ensure accurate cuts and ease of useIncludes centering tool, which aligns the jig with the center of the router bit; stores onboardCentering line on sled aligns the bit with your cut lineTaller fences can be added to stock ABS fences to stabilize larger framesFences are removable to accommodate taller boxesWorkpiece can be clamped to sled if additional support is neededAll adjustments are achieved with tool-free knobsMDF base with durable ABS sledFits standard 3/8'' x 3/4'' miter slotInstructions includedFits router tables on which center of miter track is between3-1/4'' and 6-7/8'' from center of the bit.
Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.
Heavy-Duty 1-3/4 HP (maximum motor HP) Fixed Base Router Kit3 Year Limited Warranty1-3/4 HP (maximum motor HP), 11 amp motor provides the power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64" incrementsAdjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-lockingIncludes:DW616M motor packDW6184 fixed base1/4" and 1/2" colletssub-base concentricity gauge2 wrenchesheavy-duty kit boxFeatures & Benefits:1-3/4 HP (maximum motor HP), 11.0 Amp motor provides the power to rout smoothly through the toughest hardwoodsMicro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset locationAdjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-lockingQuick release motor latches for fast and easy motor pack removal for bit and base changesDetachable cordset offers cordset serviceability and the ability to use the same motor pack for all basesSub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy
With a full 1" of carbide length and four interchangeable bearings, this rabbeting bit is capable of cutting in horizontally at 5/16", 3/8", 7/16" and 1/2" increments, and up to 1" vertically, infinitely adjustable with your router. The carbide is ground to a fine edge to provide the longest possible cutting life, and smooth, burn-free rabbets. It features a rugged 1/2" shank that cuts vibration for the smoothest possible cut. A hex wrench is included for swapping the bearings.