Make your router even more useful with this Router Bushing Set! Turns your router into a precise cutting tool for duplication work, cutting dovetails, cutting custom signs, or following your favorite templates. Includes 1/2" and 1/4" Dovetails, a Stanley F 3, Butt Hinge, Lock Face, two general bushings, and two locking nuts. All fit in a convenient plastic case.Technical Details: 1/2" Dovetail Gd bushing: 11/32" ID, 7/16" OD, 5/32" long General Gd bushing: 13/32" ID, 1/2" OD, 5/16" long General Gd bushing: 9/32" ID, 3/8" OD, 5/16" long 1/4" Dovetail Gd bushing: 1/4" ID, 5/16" OD, 5/32" long Stanley F 3 Gd bushing: 17/32" ID, 5/8" OD, 9/16" long Butt Hinge Gd bushing: 5/8" ID, 51/64" OD, 9/16" long Lock Face Gd bushing: 21/32" ID, 3/4" OD, 9/16" long
Includes everything you need to capture dust from two key areas on your routing table: Router Table Dust Bucket (32321)Router Table Dual Dust Port (20225)2-1/2'' x 36'' clear Dust Hose (34203)Features:Easy-access door with magnetic catch for quick height adjustments Adjustable vent for suction control to prevent boards from stickingBucket is easy to assembleKeyhole slotted to attach to most router table topsFits most routers, including large plunge routers
Intricate solid wood inlays with delicate geometric patterns. Great for adding a decorative touch to jewelry boxes, table tops, picture frames and more. Inlay bandings are easy to apply. Simply rout out a groove with a straight router bit, glue in the banding, sand lightly, and seal. Note: Dimensions are nominal and should be measured before routing the recess for installation.
Meet the ultimate router table! At 24'' x 32'' x 1-1/2'', the cast iron top is the largest, flattest, and most durable option on the market. Weighing in at nearly 100 pounds, it's built from one solid piece of cast iron to absorb vibration better than any table on the market. It provides more than five square feet of ultra-flat, precision-ground work surface. Plus, it includes a Rockler Steel Stand with pre-drilled holes so you can easily add your own custom cabinet and a ProLift Router Lift (see below for more details). Plus, you get the 32'' ProFence, a precision-milled aluminum fence with two MDF sub-fences, jointer bars, front and rear T-tracks, a 2-1/2'' dust port and an integrated bit guard. Dual T-tracks in the table: a standard miter slot and a Universal T-track for accessoriesCast iron table top provides over five square feet of surface areaUniversal T-tracks accept 1/4'' and 5/16'' T-bolts as well as 1/4'' hex bolts perfect for hold-downs, stops, featherboards and more32'' Pro Fence is precision machined for flatness and squareness and includes front- and rear-mounted universal accessory T-tracksSturdy steel stand has pre-drilled holes so you can add your own cabinet or dust shroud Bench Dog ProLift Router Lift: You'll love this router lift's range, speed and accuracy! With 0.001" adjustment resolution, it allows for absolute precision with the naked eye. Enjoy unmatched linear motion speed and convenient features. After removing the insert plate, raise the collet above the table for easy bit changes of any size. And with heavy-duty bronze bushings, the ProLift is designed to withstand demanding daily use. Integral fins keep your router running cool, while the direct-drive mechanism eliminates the complication and slop of belts, chains and gears. Plate size: 8-1/4" x 11-3/4"Plastic insert ring with 1-1/2" openingCompatible with large opening insertsVertical travel: 5-1/2" (varies slightly w/ installation)Height adjuster: 0-1/8 scale, 0.0025" incrementsIncluded tools: speed wrench/socket/fine adjusterWeight w/o router: 22 lbs Use ProLift only with fixed-base routers. It fits 4.2" diameter motor housings, such as those of the Porter-Cable 7518 and 7519. Adapters (sold separately) are required as noted below for routers with smaller motors. 28842 ProLift Adapter 40-002 Porter-Cable 690 SeriesPorter-Cable 890 SeriesBosch 1617Bosch 1618DeWalt 610DeWalt 616DeWalt 618 26603 ProLift Adapter 40-003 Makita RF1100 and RF110