Zinc Shelf Bracket, 4'' x 5''

These shelf brackets are perfectly sized for narrower shelves in closets, laundryrooms, workshops, and any area where space is at a premium. They are the perfect depth for paint and finishing cans, hand tools, a router shelf, molding and much, much more. Screws not included. Sold singly.Technical Details:Steel construction with a zinc finish for corrosion resistance.Pre-drilled for #7 wood screws (not included).Note: Shelf brackets can be mounted with either the 4" or 5" arm secured to the wall. Although for heavier applications, recommend mounting the 5" arm to the wall.

$1.99
Buy
 

Related Products

Rockler CNC Table

Rockler CNC Table
$249.99

At 28" x 40", it's large enough to accommodate any CNC Shark, as well as most other consumer CNC routers. Your controller hangs conveniently below the table in a saddle-shaped bracket, and is easy to access for emergency shut-downs. With its sturdy steel stand as a foundation, you'll get rock-solid stability, and plenty of storage potential, and the included leveling feet ensure that your router bed stays flat for precise results.MDF Top:Table top measures 28" x 40". Top is made of 1-1/8" thick melamine-coated MDF with 3mm black edge banding.Steel Stand (included):Steel base measures 24"W x 36"L x 32"H.All legs and stretchers are pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts. Legs are heavy-duty 1/8" steel to support any shop application. Includes 4" x 1/2" heavy-duty adjustable levelers for various height settings.Includes four 32" legs and all mounting hardware (carriage bolts and nuts).Top stretchers can be mounted flush with top or 4" down to add drawer or woodworking vice. All parts coated with durable black sand paint. Optional casters can be mounted in place of the adjustable feet (47034, sold separately).CNC Controller Bracket:Compatible with controllers for CNC Shark routers.Inside width of CNC Controller Bracket is 11-3/4".Inside height is 5-1/2", which leaves space for the controller to hang below the top stretcher.Sturdy steel construction.

Rockler 5-Piece CNC Router Bit Set

Rockler 5-Piece CNC Router Bit Set
$199.99

Create signs and table tops with decorative edging in almost half the time with this unique 5-Piece CNC Router Bit Set from Rockler. The set includes three innovative dual-purpose bits, which simultaneously cut your parts to size and apply one of three edge profiles: 1/2-inch cove, 45° chamfer or 1/2-inch roundover. There's no need to remove the parts to machine them again on a traditional router table. Also included in the set are two signmaking bits - a 60° V-groove bit, and a flattened round nose bit-perfect for routing letters or applying other decorative effects, such as scrolling and borders. All five CNC bits come packaged in an attractive wooden case with designated spots for each bit. 1/2-inch shanks. Cuts parts to correct dimension and shape, and applies an edge profile - all in one shot! No need for a bearing guide means no gummed up bearings, and no marks on the edge of your work piece from bearings that don't spin well. All five CNC router bits feature 1/2-inch shanks for stability, and 2 carbide flutes fora long cutting life.Note: For best results and longer tool life we recommend slowing the feed rate while making several passes.

Rockler Customizable Shop Stand

Rockler Customizable Shop Stand
$29.99

The Rockler Customizable Shop Stand is perfect as a work station, router table cabinet, workbench, assembly table or tool stand! You can easily use your grinder, sander, router table, scroll saw, chop saw and more!All legs and stretchers pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts.Shop stand legs are heavy-duty 1/8'' steel to support any shop application. With 4'' x 1/2'' heavy-duty adjustable leveler for various height settings. Includes four 32'' legs and all mounting hardware (carriage bolts and nuts).Stand stretchers available in four sizes: 18'', 24'', 36'', 48'' and 60''. Each size includes four stretchers. Top stretchers can be mounted flush with top or 4'' down to add drawer or woodworking vice. Maximum stand size is 60'' x 60''. All parts coated with durable black sand paint. Shop stand hinges come complete with nuts and bolts for attaching to metal frames.How To Order:Step 1: Determine your ideal shop stand height. Purchase 1 set of 28" or 32" Shop Stand Legs.Step 2: Determine your ideal shop stand length. Purchase 1 set of Stand Stretchers (18", 24", 36", 48", or 60'').Step 3: Determine your ideal shop stand depth. Purchase 1 set of Stand Stretchers (18", 24", 36", 48", or 60'').Step 4: Complete your Rockler Shop Stand with a top, casters or drawers.Table TopsCastersDrawersShop Stand Accessories