Powermatic 25'' Dual Drum Sander 5HP

Finally, a production class Dual Drum Sander that is loaded with features. This machine features a 5HP motor to power the twin poly V-belts. The dual steel drums have a hard durometer rubber coating to assure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides years of vibration free sanding, with plenty of storage space underneath.Features:5HP motor for plenty of power Independently adjustable rear drum for fine tuning Hard durometer rubber coating on steel drums provides flat, smooth finish Two-speed gearbox for wide range of sanding projects Full size cast iron table for solid support Forward/reverse poly conveyor belt grips stock evenly Dual dust ports with directional baffles for more efficient dust removalStandard Equipment:Two speed gear box Dual 4" dust ports Sandpaper on drums Tool kit

$4,284.99
Buy
 

Related Products

Porter-Cable 5'' Hook-and-Loop Replacement Sanding Pad

Porter-Cable 5'' Hook-and-Loop Replacement Sanding Pad
$20.99

The Porter-Cable 13904 5'' Hook-and-Loop Sanding Pad is a standard replacement pad for Porter-Cable 5-hole 5'' diameter orbital sanders, including the PC 333. If your original pad is worn or no longer holds the abrasive securely, this pad will give new life to your trusty old sander. Easy installation. Sold individually. Accommodates 5'' hook-and-loop discs with a 5-hole dust collection patternStandard replacement pad for Porter-Cable 333 Random Orbit sanderDust collection holes for a comfortable working environmentEasy screw-on installation

Sander Sitter Orbital Landing Pad

Sander Sitter Orbital Landing Pad
$21.99

Now you don't need to turn your sander on and off each time you need to reposition your work.While it sits, you're free to work - and your sandpaper disk gets gently cleaned by the crepe pad. Eliminates 70% - 80% of debris from the disk.Now you don't need to turn your sander on and off each time you need to reposition your work. Instead, let it land on the Sander Sitter! While it sits, you're free to work--and your sandpaper disk gets gently cleaned by the crepe pad.Replacement crepe disk pads are also available, sold separately.

Jet 723950 1-HP Oscillating Spindle Sander

Jet 723950 1-HP Oscillating Spindle Sander
$1,499.99

Thanks to a powerful 1HP motor, ten different spindle assemblies ranging from 1/4'' to 4'' in diameter, plus a full 1-1/2'' of vertical oscillation, the Jet JOSS-S Spindle Sander will make quick work of sanding a huge variety of inside curves. With its heavy-duty floorstanding design and spacious table, even large workpieces can be handled comfortably, with minimal tipping. The table can be tilted up to 45° to the front and 15° to the rear for sanding beveled edges. All spindles conveniently store in a neat rack inside the cabinet. Special attention has been payed to optimizing dust collection on this sander, including a flexible baffle system beneath the table to direct dust into the ports. With its rugged construction and precision ball bearings, this sander is sure to be with you for the long haul. Baffles create a chamber under the table for improved dust collection4'' dust port connects to your dust collection system to keep yourwork area cleanSpindle lock for quick and easy spindle changesTable tilts 45° front and 15° back and features a 90° quick indexIntegrated storage provides designated slots for spindles and table insertsSealed access door minimizes dust in the storage area1-1/2'' oscillating action reduces friction heat to protect wood and prolong sleeve lifeMain spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performanceIntegrated paddle switch with safety keyPowerful 1HP motor is independently mounted inside the base for easy access and serviceIncludes 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 1'', 1-1/2'', 2'', 3'', and 4'' spindle assembliesSpindles have threaded ends for quick, easy changesWorm and gear mechanism runs in an oil bath to prolong its life and durability