Supermax 19-38 Drum Sander

Perfect for the small shop or woodworking hobbyist, the SuperMax 19-38 churns out flat, smooth surfaces with unwavering consistency, giving you the benefits of a wide belt sander at a price that won't break the bank. Gone are the dips, gouges and sore arms of the hand sanding process. The 19-38 Drum Sander offers 19" width sanding in a single pass and 38" in a double pass, perfect for flattening and smoothing raised panel doors and drawer fronts, table tops, cabinet parts and much more. The 19-38 Drum Sander comes standard on the Open Stand. The drum is pre-wrapped with 80 grit sandpaper.Features:Simple alignment: Just one nut will adjust the conveyor parallel to the sanding head.Indexed alignment setting for narrow and wide stock. When sanding stock wider than 19", the index lever will properly adjust the conveyor for flawless sanding of wide boards.Easy height adjustments: Thrust bearing below handle and nut above it prevents drum from moving out of set position while sanding. No backlash or slop in the height adjustment mechanism, allowing easier and smoother height adjustments.Extra-wide 22" conveyor properly supports stock over 19" wide.Drum will never go "out of alignment". Drum carriage is bolted to the base, preventing any movement or alignment issues.INTELLISAND Technology automatically adjusts conveyor speed based on load, preventing gouging, damaging or burning stock, providing consistent finish even with varying grain pattern and density, and greatly increasing abrasive planing and dimensioning speed.Precision-flattened steel conveyor bed is reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sander.Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is very short or thin.Patented abrasive attachment system effectively tensions the abrasive wraps, preventing loose or overlapping abrasives.Easiest access to abrasive fastening system of any drum sander. Extra wide space to access fasteners to eliminate need for special tools.Self-cooling drum prevents overheating and extends abrasive life.Tension rollers are adjustable for height and hold down pressure, eliminating snipe.Metal dust cover is formed to shape of drum for optimum dust extraction.Heavy-duty cast iron construction for strength, rigidity and reduced vibration.

$1,399.00
Buy
 

Related Products

SuperMax 25x2 ES 25'' Dual Drum Sander

SuperMax 25x2 ES 25'' Dual Drum Sander
$2,999.99

The SuperMax 25x2 ES Dual Drum Sander has all the exceptional features of other SuperMax sanders, but adds an exclusive edge-sanding feature that makes it easy to sand the edges as well as the faces of your material. With two 25'' drums and a 3HP motor, you'll make quick work of thicknessing and surfacing rough material. The rear drum uses a finer grit sandpaper and is set slightly lower so you can sand to a finer grit and take off more material with just one pass through the sander. Digital read-outs make it easy to adjust the machine for optimal performance. The 25x2 ES also features INTELLISAND technology, which automatically adjusts the conveyor speed based on the hardness of the material and the amount of material being taken off.Features:Edge sanding feature lets you easily sand edges of panels or doors-no need for an additional machineTwo built-in digital read-outs for fast, accurate setupsTop digital read-out displays sanding height (thickness of stock)Bottom digital read-out displays differential between front and rear drum''0'' stop device for rear drum to quickly reset correct heightSanding heads move up and down rather than the conveyor so your infeed/outfeed tables can be permanently set upINTELLISAND Control automatically adjusts conveyor speed based on load, promoting a consistent finish even with varying grain patterns and wood densitiesPatented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlapSelf-cooling drum prevents overheating and extends abrasive lifeRuns quieter with almost 100% power transfer from motor to drumsMagnetic starterImportant: The assembly of this sander requires properly rated lifting equipment (hoist, straps, or forklift). Please see the User Manual for further details.

1-1/2'' Drum Sander Kit with Sanding Sleeves

1-1/2'' Drum Sander Kit with Sanding Sleeves
$9.99

Designed for sanding and grinding irregular shapes, contours and hard-to-reach areas, these sanding drums are made from premium double resin bonded aluminum oxide abrasives. Just chuck the sanding drum into your drill and get to work. They are ideal for use on wood, metal, fiberglass and painted surfaces. Includes one sanding drum with six sanding sleeves: (2) fine, (2) medium and (2) coarse.

MagSwitch Resaw Guide Attachment

MagSwitch Resaw Guide Attachment
$25.99

The Magswitch Resaw Guide tool attachment is for use with the Magswitch Workholding System (#38007, Sold Separately). Mounts to the Universal Mounting Base and MagJigs (#28844 & #21910, Sold Separately). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Angled Infeed/Outfeed to allow for blade drift adjustment. Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support.Technical Details:Product Dimensions: 4" x 8-1/2"Low profile design for use on your smallest tablesIncludes micro adjustment for fine tuning to 90 degreesFeatures roller bearing support for firm yet smooth gliding of wood through a blade