Supermax 25'' Dual Drum 3 Phase Sander - 713103

Make quick, easy work of large-scale production sanding and get remarkably smooth, consistent results with this SuperMax 25'' Dual Drum Sander. Equipped with a continuous-duty 5HP 208-230V three-phase motor, it can handle pieces up to 25'' wide and 6'' thick.(Shown with SuperMax Caster Set, Sold Separately 1004534)Exceptional SuperMax FeaturesINTELLISAND Control: Automatically adjusts conveyor speed based on load Prevents gouging, damaging or burning stock Provides consistent finish even with varying grain pattern and density Greatly increases abrasive planing and dimensioning speedFlatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sanderAbrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinnerPatented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlapEasiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.Self-cooling drum prevents overheating and extends abrasive lifeAdditional Features Drum ball bearing are sealed and permanently lubricated Cast stand, zinc-plate steel bed, centerless ground column tubes

$2,690.00
Buy
 

Related Products

Porter-Cable 5'' Hook-and-Loop Replacement Sanding Pad

Porter-Cable 5'' Hook-and-Loop Replacement Sanding Pad
$20.99

The Porter-Cable 13904 5'' Hook-and-Loop Sanding Pad is a standard replacement pad for Porter-Cable 5-hole 5'' diameter orbital sanders, including the PC 333. If your original pad is worn or no longer holds the abrasive securely, this pad will give new life to your trusty old sander. Easy installation. Sold individually. Accommodates 5'' hook-and-loop discs with a 5-hole dust collection patternStandard replacement pad for Porter-Cable 333 Random Orbit sanderDust collection holes for a comfortable working environmentEasy screw-on installation

Sander Sitter Orbital Landing Pad

Sander Sitter Orbital Landing Pad
$21.99

Now you don't need to turn your sander on and off each time you need to reposition your work.While it sits, you're free to work - and your sandpaper disk gets gently cleaned by the crepe pad. Eliminates 70% - 80% of debris from the disk.Now you don't need to turn your sander on and off each time you need to reposition your work. Instead, let it land on the Sander Sitter! While it sits, you're free to work--and your sandpaper disk gets gently cleaned by the crepe pad.Replacement crepe disk pads are also available, sold separately.

Jet 723950 1-HP Oscillating Spindle Sander

Jet 723950 1-HP Oscillating Spindle Sander
$1,499.99

Thanks to a powerful 1HP motor, ten different spindle assemblies ranging from 1/4'' to 4'' in diameter, plus a full 1-1/2'' of vertical oscillation, the Jet JOSS-S Spindle Sander will make quick work of sanding a huge variety of inside curves. With its heavy-duty floorstanding design and spacious table, even large workpieces can be handled comfortably, with minimal tipping. The table can be tilted up to 45° to the front and 15° to the rear for sanding beveled edges. All spindles conveniently store in a neat rack inside the cabinet. Special attention has been payed to optimizing dust collection on this sander, including a flexible baffle system beneath the table to direct dust into the ports. With its rugged construction and precision ball bearings, this sander is sure to be with you for the long haul. Baffles create a chamber under the table for improved dust collection4'' dust port connects to your dust collection system to keep yourwork area cleanSpindle lock for quick and easy spindle changesTable tilts 45° front and 15° back and features a 90° quick indexIntegrated storage provides designated slots for spindles and table insertsSealed access door minimizes dust in the storage area1-1/2'' oscillating action reduces friction heat to protect wood and prolong sleeve lifeMain spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performanceIntegrated paddle switch with safety keyPowerful 1HP motor is independently mounted inside the base for easy access and serviceIncludes 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 1'', 1-1/2'', 2'', 3'', and 4'' spindle assembliesSpindles have threaded ends for quick, easy changesWorm and gear mechanism runs in an oil bath to prolong its life and durability