Works with Contractor Clamps (sold separately) to provide a stop for your circular saw or router when using the clamp as a guide. Plastic housing fits the T-Tracks of the Contractor Clamps and a wing nut tightens to secure the block in place at the desired position along the clamp.
The SawStop 110V, 1.75HP 10" Professional Contractor Saw is engineered to fit the unique demands of the avid hobbyist in a home setting. Delivering the peerless fit and finish of the Professional Cabinet Saw, this saw's 110V power and optimized footprint make it ideal for the many challenges of a home shop. With SawStop's legendary safety system, uncompromising quality and industry-leading dust collection, the 110V Professional Contractor Saw is engineered to be the cornerstone of a home shop.NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.Technical Details:Motor: 1.75 hp, 1 phase, 110 V, 14 AWeight: 381 lbs (table saw only)Max. rip, right of blade: 52"Cabinet footprint: 19 3/8"W x 19 3/8"DCast iron table: 20"W x 27"D, 44"W x 27"D (w/ extension wings)Stamped steel extension wing: 12"W x 27"DBlade: 40-tooth, professional grade, 5/8" arborBlade diameter: 10"Blade tilt: LeftBlade kerf: 0.118" (3mm)Blade plate thickness: 0.078" (2mm)Max. depth of cut, blade at 0°: 3-1/8" Max. depth of cut, blade at 45°: 2-1/4"Max. rip, left of blade: 12"Dado diameter: 8" (requires a separate brake cartridge and table insert)Dado max. width: 13/16" Arbor diameter at blade: 5/8"Main bearing size: 62mm OD x 30mm ID Second bearing size: 52mm OD x 25mm IDTable in front of blade (max. elevation): 10-1/4"Table behind blade (max. elevation): 7-1/2"Arbor runout: 0.001" Maximum allowable runoutBlade lateral movement over full elevation range: 0.006" MaximumTable flatness measured diagonally: 0.010" Maximum gapOverall table and extension wing flatness: 0.025" maximum gapBlade alignment with miter slot: 0.010" Maximum displacementDeviation of miter gauge indexing stops from actual: ½0.25°Alignment between spreader and blade: 0.010" Maximum differenceMiter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deepDust collection port diameter: 4"Riving knife / splitter thickness: 0.078" (2mm)Blade guard: polycarbonate, extends only 5/8" to right of bladeInsert: zero clearance, steel core, ABS surfacesHand wheels: 7" diameter, cast iron with chrome handleBelts: 2 V-ribbed belts - arbor belt is static dissipative
The Jet HVBS-7MW Metalworking Bandsaw has everything you need to tackle even the toughest metal cutting jobs-all with a single-phase motor that's perfect for home shops. With its advanced hydraulic downfeed system, you can precisely control the rate of cut as the blade descends through the material-just let the saw do the work while you plug away at other tasks nearby. Its pump-driven blade coolant system ensures faster cutting, longer blade life and reduces wear on the motor. A high capacity swivel vise makes angle cuts easy, while the 3/4 HP, 115-volt motor delivers smooth, dependable operation, and four blade speeds let you tailor the cutting characteristics for a wide range of materials. Once the blade exits the material, the saw shuts off automatically.Features:Roller blade guides for cutting stabilityAble to handle a wide range of metalsBlade drive consists of a hardened and ground worm gearNew 8'' caster wheels for convenient moving to various work stationsBuilt-in, self-propelled blade brush extends blade lifeChip tray is built into the roller tray to help maintain a clean workspaceFully adjustable hydraulic downfeed systemHeavy-duty cast iron saw bow and bedRoller cabinet with built-in chip trayAutomatic shut-off after cutIncludes work table for working in vertical positionPump-driven coolant systemAdjustable material stopFor added safety, the motor and electrics follow strict guidelines and electrical requirements to be certified by CSA GroupUL Listed Motor
The DW716 Heavy-Duty 12" (305mm) Double-Bevel Compound Miter Saw offers power, precision, durability and versatility.Features:15.0 Amp, 3,800 rpm motor delivers extended power and durabilityAdjustable stainless steel miter detent plate with 11 positive stops ensures repeatable accuracyTall sliding fences support crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cutsDouble-bevel design allows saw to bevel left and right 0° - 48° with positive stops at 0°, 33.9°, 45° and 48° both left and right allowing user to flip the saw not the materialExclusive back fence design delivers ability to cut 2 x 10 dimensional lumber at 90° and 2 x 8 at 45°