Delta UNISAW Tablesaw, 3 HP, with 36" BIESEMEYER Fence System, Model 36-L336

The Delta 36-L352 table saw includes 3 HP, 220V, 1 Phase, 60 Hz motor, 36" BIESEMEYER fence and tube, Black precision BIESEMEYER fence and tube, Black precision BIESEMEYER fence body, UNISAW black table board 36" BIESEMEYER fence, Black 2" x 2" x 34-1/4" fence legs.Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4 degree The Cabinet Construction consists of a large cast-iron base providing stability and solid footing True American Marathon Motor provides added power and is available in both 3 and 5 HP Improved Table-Top Geometry provides more surface area to stabilize the product and offers outstanding smoothness and superior ease The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever without scraping up your skin The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench, without busting your knuckles Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle. Its mounting bracket is more solid and sturdy for those times when turning it off with a knee or a foot is necessary Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools BIESEMEYER Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an overlock with a curved edge Motor: 3 HP, 230V, 1 Phase, 60 Hz Arbor Size: 5/8 "Blade Diameter: 10 "Blade Speed: 4,300 RPMMax Rip To Right Of Blade: 52 "Max Rip To Left Of Blade: 13-1/2 "Depth Of Cut At 45°: 2-1/8 "Depth Of Cut At 90°: 3-1/8 "Distance, front of table to center of blade: 18-1/2 "Table in Front of Saw at Max. Depth of Cut: 13-1/2 "Max Width Of Dado: 1-1/8 "Miter Gauge Groove: 3/8" x 3/4" Chip Exhaust Opening: 4" & 5 "Table Height: 35 "Table Size: Size of Cast-Iron Top (with wings only): 31" x 40"; Size with BIESEMEYER Table, Wing & Laminate Board: 31" x 82 "Length: 87 "Width: 37"; With fence on saw: 46 "Height: 35 "Weight: 661 lbs

$3,199.99
Buy
 

Related Products

Fein MultiMaster HSS Saw Blades, 3-1/8", Segment

Fein MultiMaster HSS Saw Blades, 3-1/8", Segment
$12.99

High Speed Steel Segmented Saw Blades for the Fein MultiMaster in 3-1/8" diameter. The HSS Saw Blades are suitable for plastics, fiberglass, non-ferrous materials, and sheet metal up to 1 mm. Segmented blades are ideal for working in corners. Available as a single blade, or in packs of 2 or 5.

Sculpwood Moldable Epoxy Putty

Sculpwood Moldable Epoxy Putty
$16.99

Replace damaged wood with this epoxy putty that can be molded, carved, and sanded - plus sawed, nailed, machined, stained, or painted!SculpWood is a 2-component, solvent free, kneadable epoxy resin product. It is moldable, carvable, lightweight, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails. It is most commonly used in conjunction with Rot Fix , a low viscosity wood sealer and consolidant. Recommended Uses:Use SculpWood for replacing missing sections of windowsills, frames and furniture or for adding new sections to existing structures.23240: Kit includes 1 pint ea. of resin & hardener, enough for 1 qt. of putty.43812: Kit includes 4 oz ea. of resin & hardener, enough for 8 oz. of putty.

Zebrawood by the Piece-1/8" Thickness

Zebrawood by the Piece-1/8" Thickness
$6.99

The distinctive striped appearance of Zebrawood has made it a favorite for decorative inlays and veneers. The color ranges from golden-yellow to a peanut butter tone with chocolate veins running through it. The wood is hard, dense and extremely tough. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about tearout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Native to: West Africa, especially Gabon and Cameroon.Tree Data: 48" to 60" diameter trunk. The trees generally have very thick bark.Sapwood: Pale yellow.Heartwood: Light golden-yellow or pale yellow-brown, with narrow streaks of dark brown to almost black, giving a striped appearance.Grain: Generally interlocked or wavy, yielding a ribbon figure. Texture: Medium to coarse. Luster: High luster.Resin: Occasional resin pockets.Movement: Dimensionally stable. Retains its shape well after machining.Veneering Qualities: Zebrawood is used extensively in veneers for cross banding and inlays. Bundles of veneer should be stabilized with weights to prevent buckling.Working characteristics: Responds well to hand and machine tools. Quite easy to saw, but due to interlocking grain, planing is very difficult, often resulting in tearout.Polishing: Good polishing and finishing qualities. Strength: Compressive strength parallel to the grain is high. The wood is hard, very heavy, and very dense. It is tough, with good impact resistance.