FastCap Best Fence System for DeWalt Miter Saw Stand

Interested in the Best Fence System, but already have a miter saw stand? No problem! The Best Fence System is available as an add-on for most of the popular brands of miter saw stands.The Best Fence v3 System was designed from the ground up to give your miter saw a high degree of accuracy in a mobile package. Consisting of adjustment blocks and customizable fence sections, this highly modular system is easy to set up and transport and allows you to dial in your saw for exact cuts every single time.Specially designed precision mounting blocks integrate with your existing DeWalt 723X miter saw stand. The blocks have both coarse adjustments, to quickly move the fences into place, and fine adjustments to fine-tune the fences level and even with the miter saw table. Fences detach easily and can be safely transported with the included carrying bag. Fence stops calibrate quickly and easily by setting the stop to zero and cutting the sacrificial block.Additional fences can be added to extend the capacity of the Best Fence System by using the optional Male-Male Connectors to attach additional sections, with Upper Hand supports as a base for the fence. The optional Crown Molding Stop and Fence Backstop make cutting crown molding a breeze! The Accessory Bag holds the stops and other small accessories.The Best Fence System is also available for Bosch Gravity Rise miter saw stand and Kapex miter saws.Miter saw and saw stand not included.Features:Designed to mount onto DeWalt 723X miter saw stand (not included)Modular systemFits any brand or model of miter sawOffers a precision stop systemOptional accessories:Additional 64" fence sectionCustom length fence sections, from 1 foot to 12 feet in length (additional shipping may apply for fences 6 feet long or longer)Male-male connector for additional fencesUpper Hand support for long fence lengthsCrown molding stopFence backstopAccessory bag

$549.99
Buy
 

Related Products

Purpleheart by the Piece-3/4" Thickness

Purpleheart by the Piece-3/4" Thickness
$10.49

True to its name, purpleheart boasts vibrant purple heartwood, and a fine, satiny texture. Initially a dull brown, it takes on its brilliant tone shortly after the wood is cut. The sapwood is creamy, pinkish cinnamon. It has exceptionally high bending and crushing strength, is dimensionally stable, and is extremely resistant to decay. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Alternate name: Peltogyne.Tree: Usually tall, with a height of about 100 to 150 feet and a diameter of up to 48 inches, usually between 18 and 36 inches.Heartwood: Initially dull brown, rapidly changing to a bright, vibrant purple. Prolonged exposure darkens wood to a dark-purplish brown or dark brown, but the original color can be preserved with a UV inhibitor. Color variation among boards is reported to be moderate to high. Presence of minerals in some boards may cause uneven coloration and steaming is reported to affect the color. Light & Air-Induced Changes: Treatment against the effects of ultra-violet rays maintainss the original color of the wood. Treatment with Armorall, the car finish product, under lacquer is reported to hold the color well.Grain: Typically straight, occasionally wavy or irregular.Texture: Medium to fine.Luster: Medium to high.Movement: Very dimensionally stable.Natural Durability: Highly resistant to attack by decay fungi, very resistant to dry-wood termites, and somewhat resistant to attack by marine borers. Also reported to be resistant to chemicals such as acids.Cutting Resistance: Purpleheart is moderately difficult to saw. Tools usually require frequent sharpening. A reduced cutting angle of 15 degrees is recommended, especially when planing and moulding material with interlocked or wavy grain. Nailing: The wood requires to be pre-bored, but nail-holding capabilities are reported to be good.Steam Bending: The wood steam bends fairly well.Strength Properties: Bending strength in the air-dry condition is very high, and crushing strength is exceptionally high. It does not mar or dent easily, and is very heavy and dense.

Insty-Bit Quick Change Extensions

Insty-Bit Quick Change Extensions
$5.99

Can't quite fit your drill into that narrow space? No need to get a whole new set of long bits. Just pop any of your existing 1/4" hex-shank drill bits or driver bits into one of these extensions. The 12" extension allows most people to reach an 8' ceiling without a ladder, and you can even line them all up for 21" of reach! Not for use with impact tools. Each extension includes a 1" #1 Plain Hex Phillips Bit and a 2" #2 Power Groove Phillips Bit.Features & Benefits:Chuck's small 5/8" diameter fits through slim holes for increased versatility.True one-handed operation, simply push the bit into the chuck.Patented All-Hex Design holds bits tight, even when removing bits from holes.Positive action doesn't let go until you want it to.Will accept any 1/4" (6 mm) hex shank accessory, with or without a power groove.Only chuck that accepts all standards, ANSI, JIS and DIN.Black oxide finish with plated steel chuck give excellent corrosion resistance.Replaces all magnetic and non-magnetic bit holders.Quick Change hex-shank and hardened extensions optimize drill torque.Fits all keyed and keyless chucks.Works in all corded and cordless drills.Only chuck that holds all screwdriver bits 1" and longer.Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4" hex shank power tool accessories.

SawStop 1.75 HP Professional Table Saw w/36'' Fence, Rails, and Extension Table

SawStop 1.75 HP Professional Table Saw w/36'' Fence, Rails, and Extension Table
$2,469.00

The SawStop 1.75HP 10" Professional Cabinet Saw is engineered to fit the unique demands of the avid hobbyist in a home setting. Delivering the peerless fit and finish of the Professional Cabinet Saw, this saw's 110V power and optimized footprint make it ideal for the many challenges of a home shop. With SawStop's legendary safety system, uncompromising quality and industry-leading dust collection, the 110V Professional Cabinet Saw is engineered to be the cornerstone of a high-end home shop. Safety System: Automatically stops and retracts the blade on contact with skin.Blade Guard: Micro Blade Guard's multiple shield plates protect from flying debris.Tool-Free Quick-Change Blade Guard Mount: Make fast and easy transitions between blade guard and riving knife with no tools required.Quick-Release, Zero-Clearance Insert: Features a quick-release mechanism for tool-free access to the saw cavity.Award-Winning Dust Collection: Patent pending under table advanced airflow control system captures dust at the blade and directs it out of the saw through the dust collection port.Fence and Rails: The standard 30" Premium Fence and Rail is a high quality T-Style Design, featuring smooth operation and firm lockdown. The 36" or 52" T-Glide professional fence/rail systems are also available.Fit and Finish: Attention to detail, premium craftsmanship and rigorous engineering combine to create a saw you'll love to use.Precision Alignment System: Adjust the blade and table alignment with precision not found on other saws.NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.