Fein MultiMaster 157 M-Cut Saw Blade

Make cut-outs in fiberglass, CFRP, wood and sheet metal with this plunge-cut blade. Blade has a 1-3/16" edge with a maximum cutting depth of 1-3/4" in fiber glass and wood and 1/32" in metal.

$24.99
Buy
 

Related Products

Insty-Bit Quick Change Extensions

Insty-Bit Quick Change Extensions
$5.99

Can't quite fit your drill into that narrow space? No need to get a whole new set of long bits. Just pop any of your existing 1/4" hex-shank drill bits or driver bits into one of these extensions. The 12" extension allows most people to reach an 8' ceiling without a ladder, and you can even line them all up for 21" of reach! Not for use with impact tools. Each extension includes a 1" #1 Plain Hex Phillips Bit and a 2" #2 Power Groove Phillips Bit.Features & Benefits:Chuck's small 5/8" diameter fits through slim holes for increased versatility.True one-handed operation, simply push the bit into the chuck.Patented All-Hex Design holds bits tight, even when removing bits from holes.Positive action doesn't let go until you want it to.Will accept any 1/4" (6 mm) hex shank accessory, with or without a power groove.Only chuck that accepts all standards, ANSI, JIS and DIN.Black oxide finish with plated steel chuck give excellent corrosion resistance.Replaces all magnetic and non-magnetic bit holders.Quick Change hex-shank and hardened extensions optimize drill torque.Fits all keyed and keyless chucks.Works in all corded and cordless drills.Only chuck that holds all screwdriver bits 1" and longer.Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4" hex shank power tool accessories.

Purpleheart by the Piece-3/4" Thickness

Purpleheart by the Piece-3/4" Thickness
$10.49

True to its name, purpleheart boasts vibrant purple heartwood, and a fine, satiny texture. Initially a dull brown, it takes on its brilliant tone shortly after the wood is cut. The sapwood is creamy, pinkish cinnamon. It has exceptionally high bending and crushing strength, is dimensionally stable, and is extremely resistant to decay. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Alternate name: Peltogyne.Tree: Usually tall, with a height of about 100 to 150 feet and a diameter of up to 48 inches, usually between 18 and 36 inches.Heartwood: Initially dull brown, rapidly changing to a bright, vibrant purple. Prolonged exposure darkens wood to a dark-purplish brown or dark brown, but the original color can be preserved with a UV inhibitor. Color variation among boards is reported to be moderate to high. Presence of minerals in some boards may cause uneven coloration and steaming is reported to affect the color. Light & Air-Induced Changes: Treatment against the effects of ultra-violet rays maintainss the original color of the wood. Treatment with Armorall, the car finish product, under lacquer is reported to hold the color well.Grain: Typically straight, occasionally wavy or irregular.Texture: Medium to fine.Luster: Medium to high.Movement: Very dimensionally stable.Natural Durability: Highly resistant to attack by decay fungi, very resistant to dry-wood termites, and somewhat resistant to attack by marine borers. Also reported to be resistant to chemicals such as acids.Cutting Resistance: Purpleheart is moderately difficult to saw. Tools usually require frequent sharpening. A reduced cutting angle of 15 degrees is recommended, especially when planing and moulding material with interlocked or wavy grain. Nailing: The wood requires to be pre-bored, but nail-holding capabilities are reported to be good.Steam Bending: The wood steam bends fairly well.Strength Properties: Bending strength in the air-dry condition is very high, and crushing strength is exceptionally high. It does not mar or dent easily, and is very heavy and dense.

EZSmart Repeater Set

EZSmart Repeater Set
$179.99

Traditional track saw systems require you to measure and mark the stock, then manually align the guide rail with your markings before you make your cut. Not so with this Repeater Set and your EZSmart Track Saw System (e.g. 57811, sold separately). Once installed, you have two telescoping arms with pivoting stops on either end of your guide rail. The stops register against the edge of your material for accurate, repeated cuts. No tapping the rail to align it with your marks, just slide it up against the stops and make your cut. Made in USA. Enables easy, repeateable straight or tapered cuts without measuring and markingInstalls easily without the need for toolsCut at any dimension from 0'' to 30''Does not damage material surfacesMade for a lifetime of commercial use