Fein MultiMaster HSS Saw Blades, 3-1/8", Segment

High Speed Steel Segmented Saw Blades for the Fein MultiMaster in 3-1/8" diameter. The HSS Saw Blades are suitable for plastics, fiberglass, non-ferrous materials, and sheet metal up to 1 mm. Segmented blades are ideal for working in corners. Available as a single blade, or in packs of 2 or 5.

$12.99
Buy
 

Related Products

Purpleheart by the Piece-1/8" Thickness

Purpleheart by the Piece-1/8" Thickness
$4.99

True to its name, purpleheart boasts vibrant purple heartwood, and a fine, satiny texture. Initially a dull brown, it takes on its brilliant tone shortly after the wood is cut. The sapwood is creamy, pinkish cinnamon. It has exceptionally high bending and crushing strength, is dimensionally stable, and is extremely resistant to decay. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Alternate name: Peltogyne.Tree: Usually tall, with a height of about 100 to 150 feet and a diameter of up to 48 inches, usually between 18 and 36 inches.Heartwood: Initially dull brown, rapidly changing to a bright, vibrant purple. Prolonged exposure darkens wood to a dark-purplish brown or dark brown, but the original color can be preserved with a UV inhibitor. Color variation among boards is reported to be moderate to high. Presence of minerals in some boards may cause uneven coloration and steaming is reported to affect the color. Light & Air-Induced Changes: Treatment against the effects of ultra-violet rays maintainss the original color of the wood. Treatment with Armorall, the car finish product, under lacquer is reported to hold the color well.Grain: Typically straight, occasionally wavy or irregular.Texture: Medium to fine.Luster: Medium to high.Movement: Very dimensionally stable.Natural Durability: Highly resistant to attack by decay fungi, very resistant to dry-wood termites, and somewhat resistant to attack by marine borers. Also reported to be resistant to chemicals such as acids.Cutting Resistance: Purpleheart is moderately difficult to saw. Tools usually require frequent sharpening. A reduced cutting angle of 15 degrees is recommended, especially when planing and moulding material with interlocked or wavy grain. Nailing: The wood requires to be pre-bored, but nail-holding capabilities are reported to be good.Steam Bending: The wood steam bends fairly well.Strength Properties: Bending strength in the air-dry condition is very high, and crushing strength is exceptionally high. It does not mar or dent easily, and is very heavy and dense.

Powermatic 511 Panel Saw with 4'' Dust Port

Powermatic 511 Panel Saw with 4'' Dust Port
$5,354.99

Powermatic 511 Panel Saw with 4' Dust PortStainless steel guide tubes with eight guide roller assemblies provide smooth carriage glideDual 4" dust ports with nylon brush surrounding blade for front and rear dust exhaustTrue counterweight system keeps the carriage where you position it while loading stockSolid aluminum rollers with outside support brackets for square cutsCasters for easy mobility3HP Worm drive saw motor rotates in carriage to perform rip cutsHeavy-duty welded one-piece steel frame prevents vibration, ensures solid supportSpecifications:Arbor Diameter (in.):5/8Blade Diameter (in.):8Brand:PowermaticCut Accuracy Straight and Square (in.):1/64Dust Port Diameter (OD/in.):4Height:86inchLength:124.5inchMaximum Cross Cut Length (in.):62Maximum Cut Thickness (in.):1-1/2Maximum Rip Length (in.):UnlimitedModel Number:511Motor HP:3HPMotor Phase:1PhMotor Voltage:120VNet Weight:435poundOverall Dimensions:120 x 38 x 86Part Number:1510007Power Requirements:120V, 13 AmpsPrewired:n.a.Ship Weight:500poundWidth:39.5inch

Freud LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades

Freud LU83R Industrial Thin Kerf Heavy Duty Combination Saw Blades
$49.97

The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers. The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade.