Freud LU71M Industrial High-Production General Purpose Saw Blades

This highly aggressive general purpose blade is ideal for a production environment. With its low number of teeth and steep hook angle, this blade can operate at high feed rates. These features also make it the blade of choice when crosscutting extremely thick stock. Use it with dimensioned stock where speed is more important than surface quality. The ideal working range is from 1/4" to 1-1/4" thick for ripping and 1-1/2" to 3-1/2" thick for crosscutting. Thicker or thinner material may be cut, but some loss of surface finish may occur. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.

$96.47
Buy
 

Related Products

Purpleheart by the Piece-1/8" Thickness

Purpleheart by the Piece-1/8" Thickness
$4.99

True to its name, purpleheart boasts vibrant purple heartwood, and a fine, satiny texture. Initially a dull brown, it takes on its brilliant tone shortly after the wood is cut. The sapwood is creamy, pinkish cinnamon. It has exceptionally high bending and crushing strength, is dimensionally stable, and is extremely resistant to decay. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Alternate name: Peltogyne.Tree: Usually tall, with a height of about 100 to 150 feet and a diameter of up to 48 inches, usually between 18 and 36 inches.Heartwood: Initially dull brown, rapidly changing to a bright, vibrant purple. Prolonged exposure darkens wood to a dark-purplish brown or dark brown, but the original color can be preserved with a UV inhibitor. Color variation among boards is reported to be moderate to high. Presence of minerals in some boards may cause uneven coloration and steaming is reported to affect the color. Light & Air-Induced Changes: Treatment against the effects of ultra-violet rays maintainss the original color of the wood. Treatment with Armorall, the car finish product, under lacquer is reported to hold the color well.Grain: Typically straight, occasionally wavy or irregular.Texture: Medium to fine.Luster: Medium to high.Movement: Very dimensionally stable.Natural Durability: Highly resistant to attack by decay fungi, very resistant to dry-wood termites, and somewhat resistant to attack by marine borers. Also reported to be resistant to chemicals such as acids.Cutting Resistance: Purpleheart is moderately difficult to saw. Tools usually require frequent sharpening. A reduced cutting angle of 15 degrees is recommended, especially when planing and moulding material with interlocked or wavy grain. Nailing: The wood requires to be pre-bored, but nail-holding capabilities are reported to be good.Steam Bending: The wood steam bends fairly well.Strength Properties: Bending strength in the air-dry condition is very high, and crushing strength is exceptionally high. It does not mar or dent easily, and is very heavy and dense.

Zerust No Rust Table Saw Cover

Zerust No Rust Table Saw Cover
$59.99

If exposed to the open air for long periods of time, the cast iron surfaces of your table saw will inevitably begin to rust. Not with the Zerust Table Saw Cover, however. Once installed, this proprietary cover emits non-toxic vapor corrosion inhibitors (VCIs) that surround your table saw to prevent rust, corrosion and electrochemical reactions. Of course, it also helps to shield your equipment from airborne moisture, dust and abrasions. The rust and corrosion inhibitors will remain active for 5 years after the date of purchase. Made in USA. Dimensions: 45''W x 63''L x 19''HRemains effective for five yearsCleaner and more convenient than oilAlso great for other power tools such as lathes, jointers, planers and more

EZSmart Square and Handle Combo

EZSmart Square and Handle Combo
$109.99

With this handy tool in one hand and your circular saw in the other, you'll make quick work of breaking down sheet stock with perfect 90° corners. Simply push the fence up to the edge of your material, set your saw on the guide rail (sold separately), then make your cut. No clamps are required! Working in this way, you can make multiple cuts down a sheet of plywood without ever removing the saw from the guide rail. The EZSmart Square and Handle Combo is lightweight and portable, and attaches easily, without tools, to your guide rail. Made in USA. Works with any EZSmart Guide Rail (e.g. 55763, sold separately)For use with right- or left-handed circular sawsMade from high-grade aluminumLightweight yet ruggedErgonomically designed for comfortable handling