This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade.The LU86R006M20 blade is for Festool, DeWalt, and Makita track saws.
With 13-1/2'' of width capacity and 6'' of resaw capacity this little bandsaw takes a big bite out of the wood,without eating up much floor space. It features a sturdy cast-iron frame and table, which tilts in both directions. The computer-balanced wheels help cut vibration for less saw marks, while the single-knob blade tracking system makes it easy to keep the blade running where you want it. Graphite impregnated polymer blade guides with roller bearing thrust guides help keep the blade from overheating and breaking prematurely. Includes a 3/8'' 6 TPI blade.Features:Cast iron frame construction for strength, rigidity and reduced vibration6-spoke, precision computer balanced wheels eliminate vibration for accurate blade trackingGraphite impregnated polymer blade guides with roller bearing thrust guides provide quicker set-up and a cooler running blade
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.Also available with the premium Perma-SHIELD coating.
If you want a workbench fast, and you want it to last, then this is the kit for you. Combined with only 2x4s and plywood, this kit allows you to create a workbench of any size that will last indefinitely-all in less than an hour. The sturdy resin legs have a greater strength-to-weight ratio than steel, and are specially engineered to combat racking forces and keep the assembly perfectly square. With a weight capacity of up to 1000 lbs. per shelf, it'll hardly break a sweat under as much weight as you can dish out. Use full 4' 8' sheets of plywood for a spacious assembly bench, or throw together a power tool stand as small as 2'x2'. It's the perfect solution for custom sizes, and incredibly easy to modify. No miters, no tricky cuts or joints - all you need is a drill and a saw! Assembled workbench measures roughly 36" tall.Finished work surface can be up to 4'x8'.Rugged resin workbench legs boast a better strength to weight ratio than steel.Assembled workbench boasts a weight capacity of up to 1000 lbs. per shelf.Only straight 90 degree cuts are required.Great for all kinds of work benches: assembly tables, tool stands, potting benches and more!All hardware is included.