Incra Miter 5000 Sled

The ultimate miter cutting workstation for the table saw!Three-panel miter sled with patented Incra incremental angle control delivers perfect, repeatable accuracy.Includes 36"-64" telescoping miter fence and dual flip stop.With 364 precision indexed angle stops over +/-90° to produce perfect, gap-free miter joints on any multi-sided object.Will crosscut a 25" W board with full control on a standard 10" table saw.Steel GlideLOCK miter bar has 10 width adjustment points for zero side play and anti-friction travel.Integral hold-down clamping system locks workpiece onto the sled for maxium accuracy and the cleanest cuts possible.Renewable right panel provides zero-clearance tear-out control and cut-off support on both sides of the blade.Two aluminum T-tracks are embedded in the MDF panel top to secure hold-down clamp and provide rigid support for the fence.

$299.99
Buy
 

Related Products

Zebrawood by the Piece-1/2" Thickness

Zebrawood by the Piece-1/2" Thickness
$14.49

The distinctive striped appearance of Zebrawood has made it a favorite for decorative inlays and veneers. The color ranges from golden-yellow to a peanut butter tone with chocolate veins running through it. The wood is hard, dense and extremely tough. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about tearout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Native to: West Africa, especially Gabon and Cameroon.Tree Data: 48" to 60" diameter trunk. The trees generally have very thick bark.Sapwood: Pale yellow.Heartwood: Light golden-yellow or pale yellow-brown, with narrow streaks of dark brown to almost black, giving a striped appearance.Grain: Generally interlocked or wavy, yielding a ribbon figure. Texture: Medium to coarse. Luster: High luster.Resin: Occasional resin pockets.Movement: Dimensionally stable. Retains its shape well after machining.Veneering Qualities: Zebrawood is used extensively in veneers for cross banding and inlays. Bundles of veneer should be stabilized with weights to prevent buckling.Working characteristics: Responds well to hand and machine tools. Quite easy to saw, but due to interlocking grain, planing is very difficult, often resulting in tearout.Polishing: Good polishing and finishing qualities. Strength: Compressive strength parallel to the grain is high. The wood is hard, very heavy, and very dense. It is tough, with good impact resistance.

3'' Clock Face, Fancy/Arabic Numerals

3'' Clock Face, Fancy/Arabic Numerals
$18.99

Clock faces with quartz movements. Easy to install. Just cut a hole and pop the fully assembled clock into place. Battery operated (not included). Use a 3" hole saw or large saw tooth bit for these 3-1/2" outside diameter clocks. Requires boring a 3" diameter hole that is between 5/8" and 3/4" deep.Clock friction fits in hole with pressure tabs on sides that hold it in place.

Purpleheart by the Piece-1/8" Thickness

Purpleheart by the Piece-1/8" Thickness
$4.99

True to its name, purpleheart boasts vibrant purple heartwood, and a fine, satiny texture. Initially a dull brown, it takes on its brilliant tone shortly after the wood is cut. The sapwood is creamy, pinkish cinnamon. It has exceptionally high bending and crushing strength, is dimensionally stable, and is extremely resistant to decay. All boards are machined S4S to 1/8", 1/4", 1/2" and 3/4" thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Alternate name: Peltogyne.Tree: Usually tall, with a height of about 100 to 150 feet and a diameter of up to 48 inches, usually between 18 and 36 inches.Heartwood: Initially dull brown, rapidly changing to a bright, vibrant purple. Prolonged exposure darkens wood to a dark-purplish brown or dark brown, but the original color can be preserved with a UV inhibitor. Color variation among boards is reported to be moderate to high. Presence of minerals in some boards may cause uneven coloration and steaming is reported to affect the color. Light & Air-Induced Changes: Treatment against the effects of ultra-violet rays maintainss the original color of the wood. Treatment with Armorall, the car finish product, under lacquer is reported to hold the color well.Grain: Typically straight, occasionally wavy or irregular.Texture: Medium to fine.Luster: Medium to high.Movement: Very dimensionally stable.Natural Durability: Highly resistant to attack by decay fungi, very resistant to dry-wood termites, and somewhat resistant to attack by marine borers. Also reported to be resistant to chemicals such as acids.Cutting Resistance: Purpleheart is moderately difficult to saw. Tools usually require frequent sharpening. A reduced cutting angle of 15 degrees is recommended, especially when planing and moulding material with interlocked or wavy grain. Nailing: The wood requires to be pre-bored, but nail-holding capabilities are reported to be good.Steam Bending: The wood steam bends fairly well.Strength Properties: Bending strength in the air-dry condition is very high, and crushing strength is exceptionally high. It does not mar or dent easily, and is very heavy and dense.