Complete measuring system for your miter saw, radial arm saw or drill press is faster and more accurate than putting a pencil mark on every board!Just set precision lens cursor to desired length and place board against stop - you're ready to cut to length.Technical Details:Kit includes four 2' sections of Top Trak, two self-adhesive tapes, flipstop, production stop and mounting hardware.Flipstop has curved front edge that elevates when a board is pushed into the stop arm - perfect for squaring the end of a board before flipping it to cut to length.Production stop features dual cursors for use on either side of the blade and drops onto the top of the fence for easy removal; great for repetitive, high-production cutting.Anodized aluminum extrusion Top Trak sections can be set up to 8' long. With self-aligning mounting foot for simple installation to 3/4" thick wooden fence. Contains a recess for attaching self-adhesive measuring tape.Comes with detailed instructions.
Building extension wings for a miter saw station in your workshop used to mean lots of testing and shimming to get everything straight and level. Not anymore! Now you can get the awesome flexibility of the Best Fence on your workbench. Specially designed Precision Adjustment Blocks fasten to your bench surface to give you Best Fence accuracy and ease in seconds.Two 64" fences provide solid support for each side of the saw. Fences detach easily. Fence stops calibrate quickly and easily by setting the stop to zero and cutting the sacrificial block.Features: Modular system Fits any brand or model of miter saw Offers a precision stop systemThe Fence Stop for the Best Fence SystemThe new Universal Fence Stop from FastCap minimizes moving parts and adjustments for a simpler, more durable and more versatile design. Instead of complicated threaded adjusters, the Universal Fence Stop uses a single sacrificial board as the stop. Just set the indicator to zero and cut through the board to calibrate the stop. If after a blade change you need to recalibrate, it is just as easy. Simply zip out the screw, nudge the board toward the blade, drive the screw back in and cut through the board. As if that weren't enough, the stop is also universal and can be used on either side of the saw blade with all the same benefits. Use on the left or right side of the blade Stop flips up when not needed, then back down without losing your measurement Fast, easy, incredibly accurate calibration Since the stop extends onto the base of your saw, you can easily cut short lengths without having to use an extenderThe Bench Mount Precision Adjustment BlocksBuilding extension wings for a miter saw station in your workshop used to mean lots of testing and shimming to get everything straight and level. Not anymore! Now you can get the awesome flexibility of the Best Fence on your workbench. Specially designed Precision Adjustment Blocks fasten to your bench surface to give you Best Fence accuracy and ease in seconds.Bench Mount Precision Adjustment Blocks fasten easily to the work surface. Micro adjustments in the blocks allow you to dial in the precise height and front/back location of each fence section quickly and accurately. Fence sections can easily be removed and used with the portable Best Fence System when necessary, then brought back to the workshop and instantly set back into position.
With Micro Jig's precision tapering jig, you can cut clean, crisp tapers with precise repeatability in increments as fine as 1/8 of a degree. Cut 2-, 4-, even 8-sided tapered legs as well as tapers for table tops and cabinet parts with a single jig! The Microdial adjustment system features index holes to ensure a positive angle stop before you lock in your setting with the knobs. In addition, the tapering jig features the Memorylock system, which maintains two independent angle stops, and lets you easily toggle between the two. Two separate scales let you set the jig either by degrees or by rise and run, and of course, you can also bypass the index holes, and set the jig by lining up your layout marks. The tapering jig is designed to interface seamlessly with the optional Grr-Ripper GR100Y and GR-200 (62689, 30737 sold separately) for the ultimate in safety and versatility. Technical Details:Ideal for use with your table saw, but can also be used with a router table for routing tapered profiles such as flutes and bevels.Jointing function lets you use the tapering jig to put a perfectly straight edge on rough-sawn boards.Patent pending Microdial Colormatch System lets you to set incremental tapers in increments of 1/8 of a degree.Two separate scales for setting your angle: by rise and run or by degrees.Rise and run scale is accurate to within 1/16" per foot.Degree scale is accurate to within 1/8°.If you want to set the taper jig the traditional way by lining up your scribe marks with the miter slot, you can easily override the incremental system.Memorylock system "remembers" up to two settings so you can switch easily without having to use the scale - great for common settings that you use often.
Considering the wide variety of T-Track accessories available, the utility of the Rockler T-Track Table Top is virtually limitless. Clamp objects at the edge of the table, in the center of the table and anywhere in between for fast, stable sawing, sanding, routing or assembly. Use it with any of our many T-Track Hold Downs, or with our Bench Cookie Work Grippers and the Bench Cookie T-Track Risers (46311). You can also use it with toggle clamps mounted on our Toggle Clamp Mounting Plates (24872). The spacious top measures 28" x 40", larger than most comparable tables. Mount it on a shop-built base, or on our 24"W x 36"L ShopStand (48089, sold separately). Technical Details: Shop Stand (#48089 - Sold Separately) Steel base measures 24"W x 36"L x 32"H.Legs include 4" x 1/2" heavy-duty adjustable levelers for various height settings.