No resaw job is too big for the brute force you get with Laguna Tools LT18! The American-made 4.5HP Baldor motor cuts through hardwood logs like it's going through balsa, leaving you with face cuts that barely need finishing! Use high-performance Olson band saw blades for all of your sawing needs. Available from 1/8" wide for delicate scrollwork all the way up to 1" wide for big resawing jobs, these blades are custom-made for the Italian LT18 - select 158" length.Features:Standard high/low resaw fenceGeared trunionsEZ tension indicatorAward-winning Laguna Guide system features thumb screws for quick adjustment and precision control
Three varieties of 1-3/8" end cut blades for cutting a wide range of materials with your multi-tool. Use the Wood/Metal blades for cutting wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and hardened fillers, the Standard Wood blades for wood, plastic and drywall, and the Precision Wood blades for fine cutting of wood and soft plastics. Great for plunge cutting, shimming and precision cuts. Stepped profile allows the blade to cut flush with the surrounding surface. Designed for use with Rockwell Sonicrafter Multi-Tools RK5139K (46768) and RK5140K (48783). Universal Fit System also allows it to be used with almost any other multi-tool. Also available in packs of 3 (see below).Technical Details:1-3/8" end cut saw blade allows flush cuts, plunge cuts and precision cuts in a variety of materials.Capable of plunge cuts up to 1-5/8" deep.Stepped profile allows cuts flush to the surrounding surface.Use with Rockwell Sonicrafter Multi-Tools RK5139K (46768) and RK5140K (48783).Universal fit system adapts to fit other multi-tool brands.
Much like your car, power tools need regular maintenance to perform at their best and realize their maximum life span. Additionally, well-maintained power tools also run more safely. This interactive DVD-ROM will show you the fundamental maintenance procedures for seven major woodworking power tools: the table saw, jointer, drill press, dust collector, air compressor, pneumatic nailer and even a moisture meter. You'll get step-by-step instructions, over 150 photos and over 60 minutes of video from experts Sandor Nagyszalanczy and Chris Marshall, Senior Editor of Woodworker's Journal magazine. Learn to tune and maintain your table saw, jointer, drill press, dust collector, air compressor, pneumatic nailer and moisture meterPractical, entertaining instruction includes over 150 photos and over 60 minutes of videoDVD-ROM format provides easy, searchable navigationNote: DVD-ROMs usually require a computer to view
Reverse teeth eliminate chipping on the underside of the workpiece, and cut on both the upstroke and the downstroke. Designed after the PGT Precision Ground Tooth blades, their wide teeth-spacing keeps the blade from bogging down. Precision milled to cut easily through both hard and soft woods.5" long blades with plain ends (unpinned).Precision milled teeth.Wide-spaced, ultra-sharp teeth clear the shavings quickly.Available in 3R, 5R, 7R and 9R sizes.Diagonally cut ends allow easy feed through starter holes and make installation a snap.12 blades per pack.22647 No. 3R, 13 TPI, 7 Rev.0.032" Wide0.014" ThickFor accurate, tight radius cuts in hard/soft wood 3/16" or thicker.27115 No. 5R, 13 TPI, 7 Rev.0.038" Wide0.016" ThickFor steady, close radius cuts in hard/soft wood 1/4" or thicker.22455 No. 7R, 8 TPI, 6 Rev.0.046" Wide0.017" ThickFor fast, close radius cuts in hard/soft wood 1/2" or thicker.26282 No. 9R, 8 TPI, 6 Rev.0.055" Wide0.018" ThickFor fast, close radius cuts in hard/soft wood 5/8" or thicker.