The award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated. The melamine extension table with steel frame doubles as a mobile workbench, complete with bench dog holes and a vise.Quick release riving knife greatly reduces binding/kickback risk Built-in retractable caster system (patent pending) for immediate shop mobility Push button arbor lock (patent pending) for rapid blade change Extension table doubles as a mobile workbench Poly-V drive belt system delivers efficient, quiet operation Wide stance heavy-duty trunnion for stability and smooth blade positioning Adjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cuts Industrial-duty Accu-Fence System ensures accurate cuts Enclosed cabinet with cast iron base for rigidity Heavy-duty deluxe micro-adjust miter gauge with aluminum extruded 13" extension fence, for good workpiece support and fine angle adjustments. Precision ground, high luster, cast iron table top with front and rear edge bevel to prevent catching of miter gauge on table edge Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement Industrial magnetic controls, and jumbo stop switch is reachable with the knee Built-in 4" port for dust collectionStandard Equipment:TEFC Motor with magnetic controls Standard left and right cast iron extension wings Accu-Fence system with 50" to the right cutting capacity Workbench extension table Arbor wrench Motor cover Blade, power cord plug not included
Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is controlled with a fine-threaded adjustment knob. Constructed of cast iron and steel.
The 3 HP SawStop 10" Professional Cabinet Saw provides superior performance to meet the demands of discerning craftsmen and woodworkers. With SawStop's legendary safety system, ground breaking 99% dust collection and peerless fit and finish, it's ready to help you get the job done.Safety System: Automatically stops and retracts the blade on contact with skin.Dust Collection Blade Guard: Low profile guard collects above table dust and minimizes blade exposure.Tool-Free Quick-Change Blade Guard Mount: Make fast and easy transitions between blade guard and riving knife with no tools required.Quick-Release, Zero-Clearance Insert: Features a quick-release mechanism for tool-free access to the saw cavity.99% Efficient Dust Collection: Advanced control of over-and-under table airflow captures dust at the blade and directs it out of the saw.Fence and Rails: Infinitely adjustable T-Glide rail system and widely spaced glide plates provide smooth travel along the length of the table.Fit and Finish: Attention to detail, premium craftsmanship and rigorous engineering combine to create a saw you'll love to use.Precision Alignment System: Adjust the blade and table alignment with precision not found on other saws.NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.
The SawStop 110V, 1.75HP 10" Professional Contractor Saw is engineered to fit the unique demands of the avid hobbyist in a home setting. Delivering the peerless fit and finish of the Professional Cabinet Saw, this saw's 110V power and optimized footprint make it ideal for the many challenges of a home shop. With SawStop's legendary safety system, uncompromising quality and industry-leading dust collection, the 110V Professional Contractor Saw is engineered to be the cornerstone of a home shop.NOTE: No International shipping available on SawStop items. SawStop items can only be shipped within the Continental United States. SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.Technical Details:Motor: 1.75 hp, 1 phase, 110 V, 14 AWeight: 381 lbs (table saw only)Max. rip, right of blade: 52"Cabinet footprint: 19 3/8"W x 19 3/8"DCast iron table: 20"W x 27"D, 44"W x 27"D (w/ extension wings)Stamped steel extension wing: 12"W x 27"DBlade: 40-tooth, professional grade, 5/8" arborBlade diameter: 10"Blade tilt: LeftBlade kerf: 0.118" (3mm)Blade plate thickness: 0.078" (2mm)Max. depth of cut, blade at 0°: 3-1/8" Max. depth of cut, blade at 45°: 2-1/4"Max. rip, left of blade: 12"Dado diameter: 8" (requires a separate brake cartridge and table insert)Dado max. width: 13/16" Arbor diameter at blade: 5/8"Main bearing size: 62mm OD x 30mm ID Second bearing size: 52mm OD x 25mm IDTable in front of blade (max. elevation): 10-1/4"Table behind blade (max. elevation): 7-1/2"Arbor runout: 0.001" Maximum allowable runoutBlade lateral movement over full elevation range: 0.006" MaximumTable flatness measured diagonally: 0.010" Maximum gapOverall table and extension wing flatness: 0.025" maximum gapBlade alignment with miter slot: 0.010" Maximum displacementDeviation of miter gauge indexing stops from actual: ½0.25°Alignment between spreader and blade: 0.010" Maximum differenceMiter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deepDust collection port diameter: 4"Riving knife / splitter thickness: 0.078" (2mm)Blade guard: polycarbonate, extends only 5/8" to right of bladeInsert: zero clearance, steel core, ABS surfacesHand wheels: 7" diameter, cast iron with chrome handleBelts: 2 V-ribbed belts - arbor belt is static dissipative