The award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated.Quick release riving knife greatly reduces binding/kickback risk Built-in retractable caster system (patent pending) for immediate shop mobility Push button arbor lock (patent pending) for rapid blade change Poly-V drive belt system delivers efficient, quiet operation Wide stance heavy-duty trunnion for stability and smooth blade positioning Adjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cuts Industrial-duty Accu-Fence System ensures accurate cuts Enclosed cabinet with cast iron base for rigidity Heavy-duty deluxe micro-adjust miter gauge with aluminum extruded 13" extension fence, for good workpiece support and fine angle adjustments. Precision ground, high luster, cast iron table top with front and rear edge bevel to prevent catching of miter gauge on table edge Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement Independent leaf blade guard and anti-kickback pawls promote safe cutting Industrial magnetic controls, and jumbo stop switch is reachable with the knee Built-in 4" port for dust collectionStandard Equipment:TEFC Motor with magnetic controls Standard left and right cast iron extension wings Accu-Fence System with 50" to the right cutting capacity Melamine-surface extension table, legs and Rout-R-Lift Arbor wrench Motor cover Blade, power cord plug not included
Made from genuine wood flour, these fillers closely emulate the properties of real wood. They can be stained, sawed, drilled, sanded, planed and nailed, just like the real thing. They show no noticeable signs of shrinking or cracking, so you'll only have to apply it once for a smooth repair. It spreads smoothly and evenly, and sinks into gaps. No mixing is required, and it dries in only 15 minutes. Suitable for interior or exterior use. Available in 10 colors.Instructions for use:Match wood filler color to unfinished wood. Always test filler, stain and finish combination on small area.Press wood filler into defect.When dry, sand flush with surrounding surfaces.Sand and finish after approximately 15 minutes.Use Famowood Solvent (54684) for cleanup.Over time, the filler in the can may thicken. Use Famowood Solvent (54684) to restore wood filler to its original consistency.
This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade.
This heavy-duty blade is designed primarily for heavy use in a cabinetmaker's shop. Combining a 10° hook angle and the alternate top bevel tooth grind, this blade provides a good crosscut and long cutting life in hardwood, softwood, plywood, and chipboard. The LU73M series is ideal for cutting a wide variety of materials most commonly used by cabinet makers in thicknesses from 1/2" to 2-3/4" thick. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.