Powermatic PM2000 10" Tablesaw, 5HP 3PH 230/460V, 50" Accu-Fence System, Rout-R-Lift

The award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. Adjustable angle indicators on the blade tilt scale for repeatable bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated.Quick release riving knife greatly reduces binding/kickback risk Built-in retractable caster system (patent pending) for immediate shop mobility Push button arbor lock (patent pending) for rapid blade change Poly-V drive belt system delivers efficient, quiet operation Wide stance heavy-duty trunnion for stability and smooth blade positioning Adjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cuts Industrial-duty Accu-Fence System ensures accurate cuts Enclosed cabinet with cast iron base for rigidity Heavy-duty deluxe micro-adjust miter gauge with aluminum extruded 13" extension fence, for good workpiece support and fine angle adjustments. Precision ground, high luster, cast iron table top with front and rear edge bevel to prevent catching of miter gauge on table edge Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement Independent leaf blade guard and anti-kickback pawls promote safe cutting Industrial magnetic controls, and jumbo stop switch is reachable with the knee Built-in 4" port for dust collection Standard Equipment:TEFC Motor with magnetic controls Standard left and right cast iron extension wings Accu-Fence System with 50" to the right cutting capacity Melamine-surface extension table, legs and Rout-R-Lift Arbor wrench Motor cover Blade, power cord plug not included

$3,589.99
Buy
 

Related Products

Zero-Clearance Insert for SawStop Jobsite Saw

Zero-Clearance Insert for SawStop Jobsite Saw
$29.00

This is a replacement zero-clearance insert for the one included with your SawStop Jobsite Saw (56191, sold separately), useful in the event that the original is lost or damaged. You can also buy multiple inserts for dedicated sawblades and setups. Leveling screws and a concealed tool-free latch ensure a secure, precise fit with your saw. Clearance slots for the blade guard and riving knife are pre-machined in the rear of the insert. To enjoy clean, chip-free cuts, just raise the running blade through the insert to create a zero-clearance slot. Made of glass filled nylon. Fits the SawStop Jobsite Saw (56191, sold separately)Zero-clearance for accurate cuts and reduced tearoutOne-push locking mechanism for tool-free installationLeveling screws ensure flatness and smooth slidingPre-formed slots for the SawStop blade guard and riving knife

Powermatic 511 Panel Saw with 4'' Dust Port

Powermatic 511 Panel Saw with 4'' Dust Port
$5,354.99

Powermatic 511 Panel Saw with 4' Dust PortStainless steel guide tubes with eight guide roller assemblies provide smooth carriage glideDual 4" dust ports with nylon brush surrounding blade for front and rear dust exhaustTrue counterweight system keeps the carriage where you position it while loading stockSolid aluminum rollers with outside support brackets for square cutsCasters for easy mobility3HP Worm drive saw motor rotates in carriage to perform rip cutsHeavy-duty welded one-piece steel frame prevents vibration, ensures solid supportSpecifications:Arbor Diameter (in.):5/8Blade Diameter (in.):8Brand:PowermaticCut Accuracy Straight and Square (in.):1/64Dust Port Diameter (OD/in.):4Height:86inchLength:124.5inchMaximum Cross Cut Length (in.):62Maximum Cut Thickness (in.):1-1/2Maximum Rip Length (in.):UnlimitedModel Number:511Motor HP:3HPMotor Phase:1PhMotor Voltage:120VNet Weight:435poundOverall Dimensions:120 x 38 x 86Part Number:1510007Power Requirements:120V, 13 AmpsPrewired:n.a.Ship Weight:500poundWidth:39.5inch

Kreg DIY Project Kit

Kreg DIY Project Kit
$99.00

A major challenge facing beginning do-it-yourselfers and woodworkers is a lack of accurate jigs to guarantee precise results. The Kreg DIY Project Kit overcomes this challenge by providing you with three must-have jigs: the Kreg Rip-Cut Circular Saw Guide for accurately cutting parts to size, the Kreg R3 Pocket-Hole Jig for putting those parts together, and the Kreg Shelf Pin Jig for installing easily adjustable shelves. With this kit and a few other basic tools, you'll be building cabinets, bookshelves and tables in virtually any size. Plus, the DIY Project Kit comes complete with FREE downloadable, step-by-step plans for 10 projects, potentially saving you hundreds (maybe even thousands!) of dollars by custom-building these items. Rip-Cut attaches to almost any circular saw and guides it straight, allowing you to cut your own project materials, like plywood and other sheet goodsKreg Jig R3 joins wood with Kreg's proven pocket-hole joinery systemShelf Pin Jig drills perfectly-placed, repeatable shelf-pin holes for customized adjustable shelvingComes complete with downloadable step-by-step plans for 10 custom home projects FREE downloadable project plans include: Entryway OrganizerGarage Storage SystemCloset OrganizerKitchen CartFarmhouse TableCompact BookcaseConsole TableWall Display ShelfCompact DeskCoffee Table